Panasonic LP-M Series, Руководство по последовательной связи

Страница: 152 / 204

152
Name
Data length
[byte]
Description Remarks
Start line 2 “01”–“30” [row]
The start and end line of character
string for marking with this condition is
indicated.
End line 2 “01”–“30” [row]
Marking shape 1
“2”: Sector CW direction outside
“3”: Sector CCW direction inside
Character height 6
Model type* Setting range [mm]
LP-Sxx0(W) “000.20”–“090.00”
LP-Sxx5(W) “000.20”–“160.00”
LP-Sxx2 “000.20”–“055.00”
LP-Mxx0/LP-Zxx0 “000.20”–“120.00”
LP-Mxx5 “000.20”–“220.00”
LP-Mxx6/LP-Zxx6 “000.20”–“330.00”
Character width 6
Center position X 7
“-300.00”–“+300.00” [mm]
The center coordinate of arc is
indicated.
Center position Y 7
Radius 7 “+000.00”–“+300.00” [mm]
Radius of line
interval
6
Model type* Setting range [mm]
LP-Sxx0(W) “000.00”–“090.00”
LP-Sxx5(W) “000.00”–“160.00”
LP-Sxx2 “000.00”–“055.00”
LP-Mxx0/LP-Zxx0 “000.00”–“120.00”
LP-Mxx5 “000.00”–“220.00”
LP-Mxx6/LP-Zxx6 “000.00”–“330.00”
The difference of radius from the center
position of marking position to the next
line is indicated when the character
string is marked over two or more lines.
Start angle 6 “-180.0”–“+180.0” [°]
The angle from the positive (+) side of
X coordinate with counter-clockwise at
the first character in character string for
marking is indicated.
Angle of
character interval
6 “-180.0”–“+180.0” [°]
The angle between the center of
character and the center of next
character is indicated.
Font No. 1
“1”: Font 1
“2”: Font 2
The number corresponding to the 2
fonts previously registered is indicated.
Bold line width 5
• LP-F10 Mode : “00.00”–“01.92” [mm]
• LP-F10W Mode
Model type* Setting range [mm]
LP-Sxx0(W)/LP-Sxx2/
LP-Mxx0/LP-Zxx0
“00.00
”
–“02.00
”
LP-Sxx5(W)/LP-Mxx5/
LP-Mxx6/LP-Zxx6
“00.00
”
–“03.20
”
Laser power
correction
3 “000”–“200” [%]
• The correction ratio is calculated
using the value set at the laser
condition as 100%.
• Laser Pulse Cycle Correction can
be specified only in LP-F10 mode.
Scan speed
correction
3 “050”–“200” [%]
Laser pulse cycle
cor.
(3)
“050”–“200” [%]
(LP-F10 mode only)
* For the detail of the model type, refer to “Target laser marker” (P.4).
ME-LPMSZ-SR-9