Panasonic LP-M Series, Руководство по последовательной связи

Страница: 92 / 204

92
■ External offset coordinates: OFS
Sets offset coordinates used for “External Offset Function” to switch coordinates using I/O input.
Setting / Readout data of external offset
STX OFS
Sub
command
[Parallel data No.] [X offset] [Y offset]
[Z offset] [ θ offset] [Power correction]
38-byte
(Check sum) Delimiter
Sub command is “S” at the time of setting and “A” for response data at the time of readout.
Readout request of external offset
STX OFS R
[Parallel data No.]
4-byte
(Check sum) Delimiter
Name
Data length
[byte]
Description Remarks
Parallel data No. 4 “0000”–“1023”
The parallel data number in which
offset is set is indicated.
X offset 8
Model type* Setting range [mm]
LP-Sxx0(W) “-045.000”–“+045.000”
LP-Sxx5(W) “-080.000”–“+080.000”
LP-Sxx2 “-027.500”–“+027.500”
LP-Mxx0/LP-Zxx0 “-060.000”–“+060.000”
LP-Mxx5 “-110.000”–“+110.000”
LP-Mxx6/LP-Zxx6 “-165.000”–“+165.000”
Y offset 8
Z offset
(Effective only
LP-M/LP-Z
series)
8
Model type* Setting range [mm]
LP-Sxxx(W) “+000.000” (fixed)
LP-Mxxx “-022.000”–“+022.000”
LP-Zxxx “-025.000”–“+025.000”
• LP-Sxxx/LP-SxxxW:
As this item is not available
for the LP-S series, set to
“+000.000”.
• LP-Mxxx/LP-Zxxx:
The offset of Z coordinate is
indicated.
θ offset 7 “-180.00”–“+180.00” [°] The rotation offset is indicated.
Power correction 3 “000”–“999”
* For the detail of the model type, refer to “Target laser marker” (P.4).
ME-LPMSZ-SR-9