Panasonic LP-M Series, Руководство по последовательной связи

Страница: 100 / 204

100
■ Marking quality adjustment: WTC
Sets laser start point, end point, edge and curve adjustments, etc.
Setting / Readout data of marking quality adjustment
STX WTC
Sub
command
[Adjustment of starting point] [Adjustment of ending point]
[Edge adjustment] [Curve adjustment] [Waiting time]
[Pre-scan time] [Jump adjustment]
[Point radiation ON] [Point radiation OFF]
Max. 33-byte
(Check
sum)
Delimiter
Sub command is “S” at the time of setting and “A” for response data at the time of readout.
Readout request of marking quality adjustment
STX WTC R (Check sum) Delimiter
Name
Data length
[byte]
Description Remarks
Adjustment of
starting point
4 “-100”–“+100” The timing of starting laser is adjusted.
Adjustment of
ending point
4 “-100”–“+100” The timing of stopping laser is adjusted.
Edge adjustment 3 “000”–“100” The wait at edge is adjusted.
Curve adjustment 3 “000”–“100” The wait at curved line is adjusted.
Waiting time 3 “000”–“100” The waiting time is adjusted.
Pre-scan time 5 “00.00”–“10.00” [ms] The pre-scan time is adjusted.
Jump adjustment (3) “000”–“100”
The correction value of galvano jump is adjusted.
(omissible)
Point radiation ON (4) “0.00”–“9.99” [ms]
The timing of the point radiation ON is adjusted.
(omissible *)
Point radiation
OFF
(4) “0.00”–“9.99” [ms]
The timing of the point radiation OFF is adjusted.
(omissible *)
* Only one of [Point radiation ON] and [Point radiation OFF] cannot be omitted. (Response is not omitted.)
When setting arbitrary point radiation ON/OFF adjustment, jump adjustment is not omissible.
ME-LPMSZ-SR-9