Panasonic LP-M Series Скачать руководство пользователя

Страница: 80 / 204

■

General condition: ALC

Sets the conditions related to whole file.

Setting / Readout data of general condition

STX

ALC

Sub

command

[X offset] [Y offset] [Z offset] [Rotation offset]

[Overwriting frequency] [Overwriting interval]

[Flip (Y axis symmetry)] [Flip (X axis symmetry)]

[2D/3D selection]

Max. 41-byte

(Check sum)

Delimiter

Sub command is “S” at the time of setting and “A” for response data at the time of readout.

Readout request of general condition

STX

ALC

(Check sum)

Delimiter

Name

Data length

[byte]

Description

Remarks

X offset

Model type*

Setting range [mm]

LP-Sxx0(W)

“-045.000”–“+045.000”

LP-Sxx5(W)

“-080.000”–“+080.000”

LP-Sxx2

“-027.500”–“+027.500”

LP-Mxx0/LP-Zxx0 “-060.000”–“+060.000”
LP-Mxx5

“-110.000”–“+110.000”

LP-Mxx6/LP-Zxx6 “-165.000”–“+165.000”

Y offset

Z offset

(Effective only

LP-M / LP-Z

series)

Model type*

Setting range [mm]

LP-Sxxx(W)

“+000.000”

LP-Mxxx

“-022.000”–“+022.000”

LP-Zxxx

“-025.000”–“+025.000”

•

LP-Sxxx/LP-SxxxW:

As this item is not available for the

LP-S series, set to “+000.000”.

•

LP-Mxxx/LP-Zxxx:

The marking position is offset to the

Z direction.

Rotation offset

“-180.00”–“+180.00” [°]

Overwriting

frequency

“0001”–“9999” [times]

Marking is repeated by the repeat

number set. When the marking on the

flying object is valid, set “0001”.

Overwriting

interval

“0.0”–“9.9” [sec] or “010”–“060” [sec]

The interval period at overwriting

marking is set.

Flip (Y axis

symmetry)

“0”: Inversion OFF

“1”: Inversion ON

The character marked is inverted to the

Y axis.

Flip (X axis

symmetry)

“0”: Inversion OFF

“1”: Inversion ON

The character marked is inverted to the

X axis.

2D/3D

selection

(Effective only

LP-M / LP-Z

series)

(1)

•

LP-Sxxx(W)

“0”

•

LP-Mxxx/LP-Zxxx

“0”: 2D marking

“1”: 3D marking

•

LP-Sxxx/LP-SxxxW:

As this item is not available for the

LP-S series, set to “0” or no data.

•

LP-Mxxx/LP-Zxxx:

Selects 2D/3D marking.

* For the detail of the model type, refer to “Target laser marker” (P.4).

Reference

• When marking on the flying object is valid, Overwriting Function cannot be used.

ME-LPMSZ-SR-9

Содержание LP-M Series













































































































































































































Результаты поиска

Содержание LP-M Series

Отзывы:

Похожие инструкции для LP-M Series

Бренды по названию

Популярные бренды

Panasonic LP-M Series, Руководство по последовательной связи

Результаты поиска

Содержание LP-M Series

Отзывы:

Похожие инструкции для LP-M Series

Бренды по названию

Популярные бренды