Panasonic LP-M Series, Руководство по последовательной связи

Страница: 132 / 204

132
■ Rank condition: RKC
Sets input conditions of “Rank Function” to switch characters using I/O input.
Setting / Readout data of rank condition
Set the rank condition of specified number with the following format:
STX RKC
Sub
command
[Parallel input]
1-byte
(Check sum) Delimiter
Sub command is “S” at the time of setting and “A” for response data at the time of readout.
Readout request of rank condition
STX RKC R (Check sum) Delimiter
Name
Data length
[byte]
Description Remarks
Parallel input 1
“3”: 4-bit × 2
“4”: 8-bit × 1
■ Rank character string: RKS
Sets character string used for “Rank Function” to switch characters using I/O input.
Setting / Readout data of rank character string
STX RKS
Sub
command
[Data No.] [Marking character string]
Max. 21-byte
(Check sum) Delimiter
Sub command is “S” at the time of setting and “A” for response data at the time of readout.
Readout request of rank character string
STX RKS R
[Data No.]
3-byte
(Check sum) Delimiter
Name
Data length
[byte]
Description Remarks
Data No. 3
Parallel input Setting range
8-bit “000”–“255”
Low 4 bit “000”–“015”
Higher 4-bit “016”–“031”
The number in which the character string is
set is indicated.
The setting range varies depending on the
condition of parallel input.
Marking
character
string
Max. 18
Use the shift-JIS code.
(Up to 9 characters)
The character string to be marked with the
specified data No. is set.
Specify 0-byte of data length to delete the
character string in the data No.
ME-LPMSZ-SR-9