Panasonic LJ-NA02, Руководство по установке

Страница: 123 / 132

23
User's Manual
and fire
with fingernails or other hard objects.
surface first.
or fingerprints on the surface of the front lid and base cover.
10. Inspection and Maintenance
10-1 Inspection
• Check the exterior of the product for damage, rust and dents. Contact the installer if a large dent and/or deformation
is found.
• Consult the installer for information on regular maintenance/inspection of the product.
10-2 Maintenance
Use a soft cloth to gently wipe off any dirt
For stubborn dirt:
(1) Remove dust/debris from the
(2) Dampen a soft cloth with clean water or neutral detergent (diluted to a ratio of 1:100).
(3) Wring the cloth tightly.
(4) Finally, wipe off all moisture from the surface.
Notice:
* Stop operating the product before cleaning it. The surface temperature may become hot while the product is in operation.
* Do not clean the product by sprinkling water over it (never use a high-pressure water hose).
* Do not use a hard cloth and/or rub the surface strongly. Doing so may cause scratches on the surface.
* Keep the surface away from volatile substances such as insect repellents, solvents and thinners.
Failing to do so may result in degradation of the paint surface quality and/or peeling of the paint coating.
* The surface of the display panel has been treated with special processing and is prone to damages. Exercise caution not to hit or
damage the surface
* Do not allow rubber or PVC materials to come in contact with the cabinet for an extended period of time. This may result in
degradation of the surface quality.
10-3 Installation Check List for the Storage Battery System
■
Standard Installation Location
Installation location Outdoor/Indoor*
Storage temperature range [°C] -20 to +40°C
Operating temperature range [°C]
0 to +40°C
(Discharging: -10 to 40°C)
Operating humidity [% RH]
0 to 90% RH
(No dew condensation)
Maximum atmospheric pressure/altitude Lower than 1000m above sea level
Sunlight Protected from exposure to continuous direct sunlight.
* When the product is installed in the building or house, it is necessary to ensure all local building regulations are complied with.
Lithium-ion Storage Battery System
" below explanation.
■
Locations Where the Storage Battery System Cannot be Installed
x On the upper floors or the roof of the building.
x Locations where concrete foundations or equivalent floor materials cannot be laid.
x Locations subject to extreme temperature fluctuations. (Where dew condensation occurs.)
explosive/flammable gases, chemicals, fire or exhaust gas from vehicles.
impeding free air flow is not permitted.)
with insufficient heat radiation. (Storage Battery Systems require free air to keep cool. Installation in confined/
strong reflected sunlight strikes during the day.
x Locations where it will receive or be subject to the impact of continuous direct sunlight.
x Locations that exceed the operating temperature range.
x Locations where the sunlight hits directly in the north or west side of the buildings without roof (eaves).
* See "■ Guidelines how to protect the product from direct sunlight" in the installation manual.
x Rooms such as solariums and greenhouses.
x Locations on moving objects such as trailer houses or cruisers.
x
Locations where
x Enclosed locations
enclosed spaces such as garden sheds or in close proximity to other appliances (i.e. air conditioner) that have the potential of
x Locations where the product may potentially become buried in snow. (Install a roof or a fence if installing the product in
snowbound regions.)
x Locations where humidity, salinity, sulfur or nitrate concentration are constantly high.
x Locations where the required installation space is not available.
* See "■ Clearance space for the
x Locations exposed to or which potentially could be exposed to excessive steam, oil vapour, smoke, dust, corrosive substances,
x Locations with strict noise requirements. (Operational noise of 40dB or lower.)
x Locations subject to impacts, shocks or vibrations caused by such as vehicle passing, machine operating, dropping, kicking or
acting of vandalism.
x Locations in the proximity of equipment/devices that are susceptible to radio interference, or locations that are emitting powerful
radio waves.
x Locations unable to bear the weight of the product.
x Regions where there is severe salt pollution.
x Locations where above sea level is below 0 m.
200 mm
200 mm
800 mm
50 mm
50 mm
Clearance space for Lithium-ion Storage Battery System