Panasonic LJ-NA02, Руководство по установке

Страница: 47 / 132

47
Installation Manual
■
Connecting the COM Terminal
1) Terminal layout and polarities
Make sure that the wires and polarities are correct.
NC NC NC COM NC
NC
2) Cable types and sizes
PVC Flexible Cable 2C 0.75 mm
2
* Please use copper wire cables.
* See 1-1. Power and Communication Line
for the cable details.
3) Stripping of wire
Please strip as conductor's stripped length related as drawing.
7 to 9mm splayed twisted bent
4) Connecting
Fully insert the wire while pressing
down on the screwdriver.
Release the screwdriver and pull gently
on the wire to check that it has been fully inserted.
(Do not pull on the wire too hard)
■
Network Connection
1) RJ-45 modular jack layout and connection
Insert the LAN cable into the modular jack as shown on the below and check that the cable is connected securely.
GRID terminal
LAN cable
CAT5e
RJ-45
modular jack
COM terminal
Communication unit Power supply unit
● Connect the LAN cable when setting up
the Network Adaptor.
■
Post Connection Processes
1) Securing the wires
Secure the POWER line and NETWORK/COM line wires with insulating locks as shown in the illustration below.
The POWER line should be held by the wire clamp in the power supply unit.
Wire clamp
POWER LINE
Cable tie
Cable tie
COM line
LAN Cable
CAT5e