Panasonic LJ-NA02, Руководство по установке

Страница: 23 / 132

23
Installation Manual
■
Clearance Space for the Installation Location
sufficient strength.
Sufficient mounting space has been allocated.
The mounting location must have the clearance space described below for installing, maintenance and heat radiation.
When wiring to the main body left side, not only the values below, the mounting location have enough space for wiring.
200 mm
200 mm
800 mm
50 mm
50 mm
●
Location Check
The mounting position is as described in this manual.
The mounting location does not belong to special locations where Lithium-ion storage battery system cannot be
mounted.
The location can bear the product’s weight, and the location is constructed with a foundation that possesses
The mounting surface is not inclined.
by qualified personnel.
pinching fingers.
secure fixing.
sufficient workers
4-2. Mounting of Lithium-ion Storage Battery System
Since the Lithium-ion storage battery system is a heavyweight product, the mounting work must be performed with
and working space.
● Do not modify or disassemble.
● Do not allow water to enter the inside of the main body. Please pay special attention while it is raining or snowing.
● Do not perform work when the scaffolding and/or your hands are wet.
● Do not use a product that has been damaged due to dropping, etc.
● Heavy objects must be handled in accordance with the regulations.
● The correct anchor bolts are being used for
● Mount the product in a level and straight manner.
● Tighten the fixing screws of each part with adequate torque.
● When you put the Main body on the base, be careful to avoid
● The work must be performed
● Fix the screws using the appropriate tools.
①
Removing the Panel Base
1) Removing the front lid screw. 2) Remove the front lid.
(1) Lift the bottom of the front lid.
(2) Lift up and remove the front lid.
Front lid
Front lid screw
(Security torx T30)
Front lid Roof
Main body
A hook at
the top of
lid
Lid
(2)
3) Remove the base cover. 4) Remove the base.
Base cover
Base cover screw
(Security torx T30)
Body fixing screw, washer
Base
(1)