Panasonic LightPix AE20, Руководство пользователя, Страница: 55 / 151

4.3.2 Setting Procedure and Modes
Make the inspection settings following the steps below:
1 Set up devices.
Install the main unit, and connect to a power supply unit, each
unit and external devices.
Section 3
2
Turn the LightPixAE20
on.
Apply 24 V DC. -
3
Configure the
LightPixAE20
(in CONFIGURATION
mode)
Set up the LightPixAE20 system in CONFIGURATION mode.
Hardware settings of the unit, output method of reading data,
saving method of captured images and other inspection
conditions.
Page 49
4
Run a teaching
(in TEACHING mode)
In the TEACHING mode, register extraction color and
template (base) image, at the same time, set the exposure
time or range for measuring area (inspection area), and area
for setting extraction color.
Page 52
5
Set judgement criteria
(in JUDGEMENT
CRITERIA SETTING mode)
In JUDGEMENT CRITERIA SETTING mode, set the limits of
area values (min. to max.). and the threshold value of degree
of similarity for detected image.
Page 56
6
Execute an inspection
(in RUN / RUNVIEW
mode)
Press the TRIGGER button in RUN (RUN VIEW) mode. Page 57
There are mainly four modes available for the LightPixAE20. The settings that you can make vary depending
on the mode. To switch the modes, follow the instructions below.
48