Panasonic KX-NS300CN, Руководство по программированию ПК

Страница: 45 / 884

A •
Select 3-digits for default value of Numbering Plan in the Easy Setup Wizard. If you
want to change to a 3-digit extension numbering plan after the PBX system is already
running using a 4-digit extension numbering plan, follow the procedure below. There
are 2 methods of creating a 3-digit numbering plan, using
10.6.1 PBX
Configuration—[2-6-1] System—Numbering Plan—Main :
1.
Set the leading number to be 2 digits, with one additional digit. This method allows
a maximum of 10 extensions.
Example:
Leading Number = 10; No. of Additional Digits = x
In this example, extension numbers 100 to 109 can be used.
2.
Set the leading number to be one digit, with 2 additional digits. This method allows
a maximum of 100 extensions.
Example:
Leading Number = 1; No. of Additional Digits = xx
In this example, extension numbers 100 to 199 can be used.
For more details, see What is the procedure to modify the Numbering Plan? in
Numbering .
Q What is the procedure to modify the Numbering Plan?
A •
Perform the following steps:
1.
Confirm that the Numbering Plan you will change is not currently being used by
any extensions (see
6.4 Tool—Extension List View ).
If it is being used by extensions, temporarily change the extension numbers of
those extensions to that of another numbering plan, or delete the extension
number (see
12.1.1 PBX Configuration—[4-1-1] Extension—Wired
Extension—Extension Settings and 12.2.1 PBX Configuration—[4-2-1]
Extension—Portable Station—Extension Settings ).
2.
Clear the Leading Number cell.
3.
Click Apply .
4.
Modify the No. of Additional Digits cell as required.
5.
Click Apply .
6.
Enter the desired value in the Leading Number cell.
7.
Click Apply .
8.
Set all extension ports to OUS status.
9.
On the relevant screens, set the extension numbers of extensions to the desired
values.
10.
Set all extension ports back to INS status.
Q When modifying the Numbering Plan, I cannot change the Leading Number.
A •
It is not possible to use the same Leading Number for 2 extension blocks, or to use a
number that could possibly overlap with another Leading Number.
So, for example, if "2" is already set as a Leading Number it is not possible to set
"21" as another Leading Number because of the possible overlap of extension
numbers.
The number you are trying to store cannot be used if it is already being used by:
•
A feature number
•
Another extension block
•
A Dial setting (see 17.1 PBX Configuration—[9-1] Private Network—TIE
Table )
•
Quick Dialling (see 10.6.2 PBX Configuration—[2-6-2] System—Numbering
Plan—Quick Dial )
In any of these cases, choose another number.
PC Programming Manual 45
2.3 Frequently Asked Questions (FAQ)