Panasonic KX-NS300CN, Руководство по программированию ПК

Страница: 299 / 884

Value Range
Max. 20 characters
XDP Mode
Turns XDP mode on or off for the port. This setting is only available when Port Type on this screen is set to
S-Hybrid.
Value Range
On: XDP enabled (The main telephone and sub telephone have different extension numbers. This is called
XDP Mode.)
Off: XDP disabled (The main telephone and sub telephone both have the main telephone’s extension number.
This is called Parallel Mode.)
Feature Guide References
2.11.10 Parallelled Telephone
5.2.6 Extension Port Configuration
Parallel Telephone Ringing
Specifies whether the sub telephone (SLT) rings at the same time as the main telephone (DPT) for an incoming
call. This setting is only available when Port Type on this screen is set to S-Hybrid.
Value Range
Yes, No
Feature Guide References
2.11.10 Parallelled Telephone
DPT Type—Type
Selects the port type.
To change the port type of an extension port, follow the steps below:
1.
Set the status of the extension port to "OUS".
2.
Change the port type of the extension port, then click Apply.
3.
Set the status of the extension port to "INS".
When changing the port type of an extension port for which Wireless XDP has been set on the 12.1.1 PBX
Configuration—[4-1-1] Extension—Wired Extension—Extension Settings screen, the Wireless XDP setting
must be deleted first.
When changing the type of a port for which one or more SDN buttons are set (except when changing between
PC Console and Telephone), all SDN buttons customised for that device will be deleted. When you attempt to
apply the new settings, a warning message is displayed showing the slot and port number for which SDN
buttons will be deleted. If you do not wish to delete SDN buttons for this port, click Cancel.
Value Range
Normal: For connecting a DPT or CS
DSS: For connecting a DSS Console (A maximum of 8 DSS Consoles can be connected to the PBX.)
VM(DPT): For connecting a Panasonic VPS through DPT Integration
PC Console: For connecting a PC Console (A maximum of 8 PC Consoles can be connected to the PBX.)
PC Programming Manual 299
9.22 PBX Configuration—[1-1] Configuration—Slot—Extension—Port Property