Panasonic KX-NS300CN, Руководство по программированию ПК

Страница: 264 / 884

IP Codec Priority
Specifies the codec used for compression and decompression of transmitted data.
Some codecs may become unavailable depending on the value set here, as follows:
–
When G.722 is selected, the priority is G.722
®
G.711
®
G.729A .
–
When G.711 is selected, the priority is G.711
®
G.729A ( G.722 is unavailable).
–
When G.729A is selected, both G.711 and G.722 are unavailable.
Value Range
G.711, G.729A, G.722
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
Packet Sampling Time (G.711/G.722)
Specifies the time interval between measurements (samples) of sound data during a conversation.
The smaller this number, the higher the quality of the transmitted sound.
Value Range
20 ms, 30 ms, 40 ms, 60 ms
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
Packet Sampling Time (G.729A)
Specifies the time interval between measurements (samples) of sound data during a conversation.
The smaller this number, the higher the quality of the transmitted sound.
Value Range
20 ms, 30 ms, 40 ms, 60 ms
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
Announce Mode
Specifies if the extension’s built-in ANNOUNCE feature is enabled. A KX-NT265, KX-NT300 series, or
KX-NT500 series phone in a remote location with ANNOUNCE enabled can provide the PBX’s IP Address
information to other terminals in the remote location in place of manually programming the PBX’s IP address
at each terminal.
Value Range
Enable, Disable
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
264 PC Programming Manual
9.14 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT—Port Property