Panasonic KX-NS300CN, Руководство по программированию ПК

Страница: 338 / 884

Channel Type
Selects the channel type.
Value Range
Undefined: Not assigned
DR2: Digital System R2
Feature Guide References
2.29.1 E1 Line Service
Trunk Property
Selects the trunk property of the E&M channel.
Value Range
Public: Use the DIL/DDI/DID method to distribute incoming trunk calls.
Private: Use the TIE line service between two or more PBXs.
Feature Guide References
2.1.1.1 Incoming Trunk Call Features—SUMMARY
4.1.2.1 Integrated Services Digital Network (ISDN)—SUMMARY
4.2.1 TIE Line Service
CO Dial Mode
Selects the type of signal used to dial out to a trunk.
If MFC-R2 is selected, the PBX (not the telephone company) sends a dial tone to the caller when making a
trunk call using an E1 line.
Value Range
DTMF, MFC-R2
Feature Guide References
2.5.4.4 Dial Type Selection
2.29.1 E1 Line Service
E1 Receiver Type
Selects the type of signal the PBX receives from the E1 line.
This should be set to MFC-R2 when receiving ANI (Automatic Number Identification) numbers from the E1
line.
Value Range
DTMF, MFC-R2, Undefined
Feature Guide References
2.29.1 E1 Line Service
338 PC Programming Manual
9.31 PBX Configuration—[1-1] Configuration—Slot—Port Property—E1 Port