Panasonic KX-NS300CN, Руководство по программированию ПК

Страница: 724 / 884

Feature Guide References
3.2.2.2 Automatic Login
Auto Login DDI/DID
Specifies the DDI/DID number for Automatic Login. When the Unified Messaging system receives this DDI/
DID number from the PBX, the caller (subscriber) is automatically logged in to the mailbox. Note that this
number must be unique for each mailbox.
Value Range
Max. 20 digits
Feature Guide References
3.2.2.2 Automatic Login
Auto Login TRG No.
Specifies the trunk number for Automatic Login. When the Unified Messaging system receives a call on this
trunk, the caller (subscriber) is automatically logged in to the mailbox. Note that this number must be unique
for each mailbox.
Value Range
1–64
Feature Guide References
3.2.2.2 Automatic Login
Auto Login DDI/DID, TRG No. Password Entry Requirement
Specifies if a password is required for entry when automatic login is performed using the trunk group number
or the DID number.
Value Range
Yes, No
Notice
If this is set to "No", ensure that unauthorised third-parties are not allowed access to any extensions using
the specified trunk group number.
Feature Guide References
3.2.2.2 Automatic Login
Auto Login Toll Saver
Allows subscribers to call the Unified Messaging system and know whether or not new messages have been
recorded in their mailboxes by the number of rings they hear before the Unified Messaging system answers
their calls. Toll Saver is available under the same conditions as Automatic Login; subscribers can use Toll
Saver when calling from an outside telephone whose number is stored as a Caller ID number, or by dialling a
telephone number assigned to a specified DID number or trunk.
724 PC Programming Manual
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting