Panasonic KX-NS300CN, Руководство по программированию ПК

Страница: 44 / 884

A •
The Portable Station can be forcibly de-registered by following the procedure shown
in
Forced De-registration of 9.34 PBX Configuration—[1-2]
Configuration—Portable Station .
Q I changed the extension number of a Portable Station, but the display of the Portable
Station still shows the old extension number.
A •
Turn the Portable Station off and back on again, to force it to re-register its location.
Q I changed the FCO of a Portable Station, but the display of the Portable Station still
shows the old FCO.
A •
Turn the Portable Station off and back on again, to force it to re-register its location.
Q If I delete the extension number of a Portable Station, and then turn the Portable
Station off and back on again, it does not function correctly.
A
•
Do not delete the extension number of the Portable Station, as this information is
necessary for it to operate.
Numbering
Q How do I change the extension number of a wired extension?
A •
Change the extension number of the target port to the new number, and click Apply .
Next, set the port to OUS status, and then back to INS status.
Q I changed the extension number of a wired extension while the extension was
engaged in a call, but the display still shows the previous extension number.
A •
The extension number will not change while the extension is in use. When the
conversation is finished, set the port to OUS status, and then back to INS status.
Q How do I change the extension numbering plan from 3-digit numbers to 4-digit
numbers?
A •
Perform the following steps:
1.
Open the 10.6.1 PBX Configuration—[2-6-1] System—Numbering
Plan—Main screen.
2.
Enter a 2-digit number in Leading Number , or change No. of Additional
Digits from "x" to "xx".
For more details, see What is the procedure to modify the Numbering Plan?
in Numbering .
Q How do I set a 3-digit numbering plan?
44 PC Programming Manual
2.3 Frequently Asked Questions (FAQ)