Panasonic ELC500, Руководство пользователя

Страница: 157 / 208

ELC500 Control unit
149
■
When you set password first
When you set password first, doesn’t enter in [Current password] and enter password in [New
password] and [Password (re-enter)].
Point
・
Password setup in this point is different from the password to access FTP server.
This password is used when it updates setup data.
・
After password is set, it will request the password at the time when the menus below
are executed.
Read out
Transfer
Status view
Current value monitor
・
When you forget the password, it can be cancelled by initializing ELC500.
In this case, setup data are initialized.
Take care for the operation and handling password.
Note
・
Password setting is designed to avoid setups being accidentally changed. If the
password is forgotten, however, it will be impossible to change the setup data even if
you want to. When specifying password, note it in the safe place in case that it is
forgotten at some point.
It is impossible to crack the password by our company.
・
ELC500 should be set to STOP/PROG mode in order to set password. You can’t set
password during RUN mode.
・
Once you enter wrong password 3 times, you can’t access until it power on again.
■
Password delete
Click ‘Option’ at menu and ‘Password delete’ to open ‘Password delete’ window.
Input the current password and click [OK] to delete the password.