Panasonic ELC500, Руководство пользователя

Страница: 121 / 208

ELC500 Control unit
113
(d) Alarm mask time Set alarm mask time.
<Initial> 0 min
<Set range> 0 to 10
(e) Use the data of the previous
period for demand
estimation. Select use the function, it calculates estimated demand
using the incline of power in the previous period, or not.
<Initial> without check = not available
(f) Control demand value Set control demand value
<Initial> 0 kW
<Set range> 0 to 999999999999999
(g) Limit control demand value Set limit control demand value
<Initial>0 kW
<Set range> 0 to 999999999999999 kW
(h) Target demand value Set target demand value
<Initial>0 kW
<Set range>0
～
999999999999999 kW
(i) Switch moving average time Select use the function, that it switches period 1st half and
2nd half for calculate demand value increasing rate to
estimate dimmed, or not
<Initial> Yes
(j) Moving average time
1
st
half
Set moving average time for 1
st
half.
<Initial> 5 sec.
<Set range> 5 / 10 / 15 / 20 / 25 / 30 / 35 / 40 / 45 / 50
(k) Moving average time
2
nd
half
Set moving average time for 2
nd
half.
<Initial> 5 sec.
<Set range> 5 / 10 / 15 / 20 / 25 / 30 / 35 / 40 / 45 / 50
(l) Switching time from 1
st
to
2
nd
half
Set time to switch moving average time.
<Initial> 10 min.
<Set range> 10 to 20
* Set each value as the followings.
Target demand value
≧
Limit control demand value
≧
Control demand value
If it doesn’t meet this condition, error message will be appeared.