Panasonic ELC500, Руководство пользователя

Страница: 23 / 208

ELC500 Control unit
15
(11) SD memory card slot
Open SD memory card cover to insert or remove SD memory card.
After inserting SD memory card, close the cover. If the cover is not closed correctly, it can’t access SD
memory card and can’t read nor write.
No. Name Function
11-1
Battery holder
Use to install the battery.
With mounting backup battery, it backup calendar timer and logging
data when power off.
11-2
SD memory card slot
Use to insert SD memory card.
11-3
Card operation switch
Select ROM operation or SD operation.
By selecting SD operation, it starts operating by SD memory card.
11-4 Battery connector Connect battery. *Note the polarity.
Note
After stop blinking access LED, eject SD memory card.
Be careful to the direction when inserting. If it is wrong, it might break unit and SD memory
card.
(12) Mode switch
It switches the operation of ELC500.
Switch Operation mode
RUN (Left)
Start operation.
Execute data collecting and logging, demand monitoring and
control, and programs.
STOP/PROG. (Center)
Stop operation.
Stop data collecting and logging, demand monitoring and control,
and programs.
COPY (Right: momentary)
Transmit the project saved in the internal RAM ROM1 to ROM2 as
a backup project.
It uses only when transmitting the project.
* You can change RUN mode or STOP/PROG. mode by ‘Configurator EL500’. It starts operation with
the mode of switch position when power on again.
(13) Fixing hook
Use to fix the power supply unit (sold separately) to the main unit.