Panasonic DP-CL21M Скачать руководство пользователя страница 33

Страница: 33 / 300

Outline for Menus

Macintosh

Windows

Basics

Prints the following pages.

■

Menu Map

Prints selectable menus.

■

Configuration Page

Prints general information on printer settings and configuration.

NOTE:

• The values [Simulated Page, the remaining information of consumables and Image Area (Last

/ Average)] shown on the Configuration Page are the approximate values and are not always
correct.

■

Test Print

Prints each color (CYAN, MAGENTA, YELLOW and BLACK) halftone to check for print quality.

■

PCL Font List

Prints a list of PCL fonts in the printer.

■

PS Font List (DP-CL21M Only)

Prints a list of PS resident fonts in the printer.

■

Spool List (Requires Hard Disk Drive)

Prints a list of Check and Print, Memory Print and Confidential Print jobs kept in the printer’s hard
disk drive. This menu is displayed only when the hard disk drive is installed.

Test Page

Содержание DP-CL21M













































































































































































































































































































Результаты поиска

Содержание DP-CL21M

Отзывы:

Panasonic DP-CL21M, Руководство пользователя, Страница: 33 / 300

Результаты поиска

Содержание DP-CL21M

Отзывы: