Recording
58
DVQX1376 (ENG)
You can synchronise the initial time code value with an external device that supports time
code input/output.
• You can synchronise the initial time code value with an external device only when
[Count Up] in [Time Code] is set to [FREE RUN] in Creative Video Mode.
A
Flash synchro socket
B
BNC conversion cable (for TC IN/OUT) (supplied)
C
BNC cable
D
External device that supports time code input/output.
• Do not use any other BNC conversion cables (for TC IN/OUT) except the supplied one.
• Do not use the BNC cables with the length of 2.8 m (9.2 feet) or more.
• We recommend using a 5C-FB equivalent double-shielded BNC cables.
∫
Connect to an external device/Prepare for synchronisation
Preparations:
Turn this unit off.
1
Rotate the flash synchro socket cap in the direction
of the arrow to remove it (
1
,
2
).
• Be careful not to lose the flash synchro socket cap.
2
Insert the BNC conversion cable (
3
), and rotate the
locking screw in the direction of the arrow to attach
the cable (
4
).
A
Locking screw
3
Connect the BNC conversion cable and the external
device with the BNC cable, and turn on the camera.
4
Set the mode dial to [
].
5
Select the menu.
∫
Synchronise the time code of the external device with that of the camera (TC OUT)
The initial time code value of the external device is synchronised according to the time
code signal (LTC signal) of the camera.
1
Connect the external device, and follow the steps needed to prepare for time
code synchronisation. (P58)
2
Set the time code output type.
Synchronising the time code with an external device
>
[Motion Picture]
>
[Time Code]
>
[Count Up]
>
[FREE RUN]
>
[Motion Picture]
>
[Time Code]
>
[External TC Setting]
>
[TC Output Reference]
MENU
MENU
DC-GH5SGN-DVQX1376_eng.book 58 ページ ２０１７年１２月４日 月曜日 午前９時４４分
