41
Recording
(ENG) DVQX1376
∫
Setting Pre-Burst Recording ([4K Burst]/[4K Burst(S/S)])
The camera starts recording approximately 1 second before the shutter button is pressed
fully, so you will not miss a photo opportunity.
• Auto Focus operation settings and menus that cannot be set while this function is in use are the
same as those during [4K Pre-Burst] operation.
∫
Setting Loop Recording ([4K Burst(S/S)])
You can perform recording while deleting the oldest recorded data, allowing you to keep
on recording while waiting for a photo opportunity without replacing the card.
• Once you start recording, the 4K burst file will be recorded and divided approximately every
2 minutes.
Approximately the last 10 minutes (up to approximately 12 minutes) will be saved. The
preceding part will be deleted.
1
Select an image with the [
] icon on the playback screen, and
press
3
.
• If the image was recorded with [4K Pre-Burst], proceed to step
3
.
2
Drag the slide bar to make a rough selection of
scenes.
• If the image was recorded with [4K Burst] or [4K Burst(S/
S)], you can select its scenes on the 4K burst playback
screen by touching [
] (Fn1).
3
Drag the frames to select the frame you want to save
as a picture.
• To continuously rewind/forward frame-by-frame, touch and
hold [
]/[
].
4
Touch [
] to save the picture.
• A confirmation screen will be displayed.
• The picture will be saved in JPEG format.
>
[Rec]
>
[4K PHOTO]
>
[Pre-Burst Recording]
>
[Rec]
>
[4K PHOTO]
>
[Loop Recording(4K PHOTO)]
Selecting pictures from 4K burst file and saving
MENU
MENU
Fn2
Fn1
DC-GH5SGN-DVQX1376_eng.book 41 ページ ２０１７年１２月４日 月曜日 午前９時４４分
