Surround effects
Settings
[Balance Fader]
Adjusts output levels for left/right (Balance) and front/rear (Fader).
default:
0
Adjust the Balance/Fader.
Adjustment range:
Balance ([Left]/[Right])
: 7 (Left) – 0 – 7 (Right)
Fader ([Front]/[Rear])
: 7 (Front) – 0 – 7 (Rear)
[Speaker Setting]
Adjusts the output level for each speaker.
default:
Speaker
Level:
0
dB
Speaker
Delay:
0
cm
Subwoofer:
120
Hz
[ Speaker Level]
Adjusts the output level for
each speaker.
Adjust the output level for each speaker.
Adjustment range: –12 dB – 0 dB – 12 dB
Make the speaker from which the test signal (a buzzing sound) is audible at the lowest volume the reference, then
adjust other speakers so they are heard with the same speaker sound.
[ Speaker Delay]
Sets the distance of each
speaker from the reference
point.
Input the distance to each speaker.
Adjustment range:
0 cm – 500 cm
When the distance is set, the
timing of sound output from
the other speakers is delayed to
match the speaker furthest from
the reference point.
(Approximately 0.3 ms per
10 cm)
Set the listening position as the reference point.
Measure the distance horizontally.
[ Subwoofer]
When a subwoofer
is connected, set the
maximum number of Hz for
audio to be output from the
subwoofer.
(Cutoff frequency)
Set the frequency.
Adjustment range: 60 Hz – 120 Hz – 200 Hz
[Graphic Equalizer]
default:
[EQ1]
Adjust the Graphic
Equalizer.
Adjust the level for each frequency band.
Adjustment range: –4 – 0 – 4
(–10
dB
–
±0
dB
–
+10
dB)
Register the current
adjustment values.
Touch and hold the setting to register, from [EQ1] to [EQ5], for at least 2 seconds.
Note:
Settings cannot be registered to [Flat].
Touch and hold [Flat] for 2 seconds or more to return all settings to the defaults.
Load registered adjustment
values.
Select the settings to load, from [Flat] to [EQ5].
Surround effects
(continued)
1
Select [Sound] on
any Source operation
screen.
(Example: AM)
2
Select the item to set.
3
Make settings.
(
right table)
Note:
SRS CS Auto will be turned off
automatically if you change Balance
Fader/Speaker Setting/Graphic
Equalizer setting.
Change audio and video settings
(continued)
Flat: (Flat)
Flat frequency response
EQ1: (Rock) Speedy and heavy sound
EQ2: (Pop) Wide-ranged and deep sound
EQ3: (Vocal) Clear sound
EQ4: (Jazz) Jazz-specifi c deep sound
EQ5: (Club) Club and disco-specifi c sound
Front L
Front R
Reference point
Rear L
Rear R
Subwoofer
50 cm
120 cm
130 cm
140 cm
70 cm
Frequency
(Hz)
Settings
60 160 400 1 kHz 3 kHz 6 kHz 12 kHz
Flat
±0
±0
±0
±0
±0
±0
±0
EQ1
+3
+1
±0
–1
+1
+2
+3
EQ2
+2
+1
+1
+1
+1
+2
+2
EQ3
+1
+1
+1
+2
+2
+3
+3
EQ4
+3
+3
+1
–2
–1
+2
+4
EQ5
+4
+3
±0
+4
+2
+3
+4
Speaker
Measure this distance
Reference point
English
English
90
91
91
90
Содержание CN-NVD905U - Strada - Navigation System
Страница 117: ...Memorandum 343 ...