Panasonic CN-NVD905U - Strada - Navigation System, Руководство по эксплуатации

Страница: 19 / 118

ACC
ON
First, select the language to use on this system. The available languages are English, French and Spanish.
English
(Default)
French Spanish
Turn on the power Select a language
When the power is fi rst turned on, the map display may differ from the actual vehicle position. Once the
GPS receives satellite signals, the map display will eventually shift to the area around the vehicle (the
current position screen). Use a clearly visible point to check your position.
If the vehicle position is not
displayed correctly, check GPS reception. (

page 23)
Check the vehicle position
Enter the 4-digit ID code.
Note:
 In case you forget the ID code, please consult your
nearest Panasonic Servicenter.
1
Start the engine. (Or turn the key to ACC.)
 Turn on the navigation system power. (It takes a few seconds for the screen to
appear.)
2
Read the precautions on the
WARNING screen, then touch
[I agree].
 The current position screen (vehicle position) is
displayed.
 Change the language used. (

page 19)
1
Touch [Language] on the
WARNING screen.
2
Touch the language to use.
[Eng.]: English (Default)
[Fr.]:
French
[Es.]: Spanish

The system restarts if the language is changed.
Note:

The language used for the touch keys, explanatory text,
voice guidance and other content can be changed. Place
names and street names do not change.

The language can also be changed on the Information
menu. (

page 25)
1
Check that the GPS mark ( )
is displayed.

It may take some time for the GPS mark to appear.

If there is no GPS mark, or if the mark continues to
fl ash, check GPS reception. (

page 23)
2
Press to display the current position screen.
3
Continue for a while along a road with good visibility.
(60 minutes or more)

The discrepancy between the position of the vehicle mark on the map screen and the actual vehicle
position will be corrected.
Note:
 If is pressed when the audiovisual screen is
displayed, the display switches to current position
screen.

If ACC is left on for a long period of time without
running the engine, it can run the battery down.
 Do not start driving until the current position screen
is displayed.
The system is preparing to boot up.
After moving this unit to a different vehicle, or after changing the battery or disconnecting its cables, the
Input ID Code screen is displayed the next time the system starts.
Generally, it is not necessary to enter the ID code each time when using the unit if it has not been
disconnected from the main power supply (car battery).
When setting the ID CODE
(

page 24)
English English
18 19
19 18