Panasonic CF-T1 Series Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 72

background image

41

SD Memory Card/MultiMedia Card

CAUTION

●

If the card is set for [Use when logging on to Windows]

When you are logging on to Windows or trying to resume computer while the
screensaver is active, if the SD memory card indicator is blinking, enter the
password through the keyboard without removing the SD memory card.
A software application, etc. may be accessing the SD memory card.
We recommend removing the SD memory card in the following cases:
• Before logging off.
• Before the computer enters either the standby or hibernation mode
• If there is a possibility that the screensaver will be activated

●

If you use an SD memory card with incorrect settings.
• When the computer is being started, an icon appears for approximately three

seconds, after which the computer will turn off.

• You cannot log on to Windows
• You cannot resume computer from standby or hibernation mode.
• You cannot disable the screensaver.
Reinsert an SD memory card with correct settings, or enter the appropriate
password.

●

If the card is set for [Use when logging on to Windows] and [Set and eject], insert
the SD memory card, then eject if after you hear a beep indicating card recognition.
(If MUTE is set, you will not hear a beep.)

●

If the computer does not respond properly when you insert the SD memory card,
remove the card and wait a few seconds, then reinsert it.

●

Do not remove or insert the SD memory card until Windows has completed loading.

Setting Up an SD Card after the SD Card Setup Program Has Been Used

After you run the SD Card Setup program once, the setup screen that appears the next
time you run it will be different. This section describes how to set up an SD card in such
cases.

1

Turn on the computer.

2

Insert the SD memory card in the SD memory card slot.

Windows XP

When [Removable disk] appears, select [Take no action], then select [OK].

3

Start the SD card setup program.

Windows 2000

Select [Start] - [Programs] - [Panasonic] - [SD Card Setup].

Windows XP

Select [start] - [All Programs] - [Panasonic] - [SD Card Setup].

4

Change the settings as necessary.

«
...
39
40
41
42
43
...
»

Содержание CF-T1 Series









































































Отзывы:

Нет отзывов

Похожие инструкции для CF-T1 Series

Бренд: Harbor Freight Tools Страницы: 4

Бренд: IBM Страницы: 102

Бренд: S&T embedded Страницы: 23

Бренд: Vivo Страницы: 12

Бренд: Portwell Страницы: 50

spo-book EXPANDED Q170

Бренд: spo-comm Страницы: 2

ARS-P3800 Series

Бренд: Advantech Страницы: 42

TitraLab AT1102

Бренд: Hach Страницы: 80

Бренд: MSI Страницы: 59

QBOX-100P Series

Бренд: Quanmax Страницы: 66

Бренд: UMAX Technologies Страницы: 54

Бренд: NC Страницы: 4

Бренд: Gateway Страницы: 136

Бренд: Gateway Страницы: 96

Бренд: IBM Страницы: 240

Touch Panel Computers

Бренд: Advantech Страницы: 12

Бренд: Advantech Страницы: 12

THINKCENTRE 8086

Бренд: IBM Страницы: 64

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды