Panasonic CF-T1 Series Скачать руководство пользователя страница 2

Страница: 2 / 72

Read Me First

●

If the user has logged on without the administrator authority, some functions may not be
executable, and some screens may not be displayed as shown in this manual. If this
happens, log on with the administrator authority to enable these functions.

●

This manual covers two types of models, as distinguished by the type of LCD screen
(models with touchscreen and models without touchscreen).

●

Confirm the latest information on optional products in catalogs, etc.

NOTE

provides a useful fact or helpful information.

CAUTION

indicates a condition that may result in

minor or moderate injury.

WARNING

indicates a hazard that may result in

moderate or serious injury.

Windows 2000

Information for Microsoft Windows 2000
Professional users.

Windows XP

Information for Microsoft Windows XP
Professional users.

Enter

This illustration means to press [Enter] key.

This illustration means to press and hold [Fn] key,
then press [F5] key.

[Start]* - [Run]

This illustration means to select [Start]*, then to
select [Run].
For some applications, you may need to select.
*

Windows XP

: [start]

For U.S.A. and Canada

Information for CF-T1RxxxxxM users.

For Hong Kong

Information for CF-T1RxxxxxH users.

This illustration means to refer to the Operating
Instructions.

●

Windows 2000 screens are used in this manual when no specific OS notes are
required.

●

Some of the illustrations in this manual may differ slightly in shape from the actual items
in order to make the explanation easier to understand.

●

About the terminology used in this manual and the Setup Utility concerning the internal
LCD and an external display

Windows 2000

: Select [Start] - [Settings] - [Control Panel] - [Intel® Extreme Graphics].

Windows XP

: Select [start] - [Control Panel] - [Other Control Panel Options] - [Intel®

Extreme Graphics].

Illustrations and Terminology in this Reference Manual

This manual and the
Setup Utility

[Intel(R) 82830M Graphics
Controller Properties]*

To display the same screen on
both the internal LCD and exter-
nal display

Simultaneous display

Intel(R) Dual Display Clone

Содержание CF-T1 Series









































































Результаты поиска

Содержание CF-T1 Series

Отзывы:

Похожие инструкции для CF-T1 Series

Бренды по названию

Популярные бренды

Panasonic CF-T1 Series, Справочное руководство

Результаты поиска

Содержание CF-T1 Series

Отзывы:

Похожие инструкции для CF-T1 Series

Бренды по названию

Популярные бренды