19
CAUTION
Setting the Supervisor Password
(enabling, changing, disabling)
Do not input your password while holding down on
Shift
or
Ctrl
.
Use only the upper horizontal row of numeric keys to input your user pass-
word.
Do not forget your password. If a password is forgotten you will be unable to
use your computer. Contact Panasonic Technical Support.
When running the Setup Utility, do not leave your computer even for a short
time.
1
2
4
3
Run the Setup Utility
(
page 51
)
Using and , select [Security]
Using and , select [Set Supervisor Password], then press
Enter
Enter your password at the [Enter New Password], then press
Enter
<Only when the Supervisor Password has been set>
Enter your password at the [Enter Current Password], then
press Enter
5
To disable the Supervisor Password
Press only
Enter
At the [Setup Notice], press Enter
6
Re-enter your password at the [Confirm New Password] , then
press Enter
7
Press F10 , then select [Yes]
To disable the Supervisor Password
Press only
Enter
8
NOTE
Your password will not be displayed on the screen.
Limit your password to seven characters. Note that there is no distinction
between upper and lower case letters.
White colored keys can be used. Note that the space bar and function
keys cannot be used.
(To next page)
Security Measures
