Panasonic AK-MSU935AP, Руководство по эксплуатации

Страница: 48 / 76

48
LENS FILE EDIT sub menu
2) When the cursor is at the second hierarchical level on the LENS FILE EDIT sub menu
When STORE is initiated, the changes are reflected in the current and camera’s LENS file. If LENS OFF has been set for the
current area, the parameters cannot be changed and will remain at zero even when an attempt has been made to change
their settings. Neither will the settings be stored even if STORE is initiated. When CANCEL is set, the adjusted parameters
are canceled, and the original LENS file is loaded in the current area again.
< LENS FILE EDIT > LENS01:CANON-01 X1.0
FILE No MAIN MENU
STORE CANCEL
R-H SAW R-H PARA R-V SAW R-V PARA
G-H SAW G-H PARA G-V SAW G-V PARA
B-H SAW B-H PARA B-V SAW B-V PARA
STORE CANCEL
YES ? YES ?
M-PED SHUTTER M-GAIN
0 100 0dB
<Screen 7-2>
The values adjusted in the lens file concerned are
not reflected but canceled, and the contents of the
stored lens file are reflected in the parameters.
To screen 7-3
To screen 7-1
The adjusted values are reflected
in the current area of the
camera’s lens file and in the lens
file currently in use.
3) When the cursor is at the third hierarchical level on the LENS FILE EDIT sub menu
< LENS FILE EDIT > LENS01:CANON-01 X1.0
FILE No MAIN MENU
STORE CANCEL
R-H SAW R-H PARA R-V SAW R-V PARA
G-H SAW G-H PARA G-V SAW G-V PARA
B-H SAW B-H PARA B-V SAW B-V PARA
R-H SAW R-H PARA R-V SAW R-V PARA
0 0 0 0
M-PED SHUTTER M-GAIN
0 100 0dB
<Screen 7-3>
This moves
the cursor to
the next level
down.
To screen 7-2
Only the bottom is
changed using the
rotary encoder.
Only the bottom is
changed using the
rotary encoder.
Only the bottom is
changed using the
rotary encoder.
Only the bottom is
changed using the
rotary encoder.
4) When the cursor is at the fourth hierarchical level on the LENS FILE EDIT sub menu
< LENS FILE EDIT > LENS01:CANON-01 X1.0
R-GAIN G-GAIN B-GAIN
R-FLARE G-FLARE B-FLARE
R-GAIN G-GAIN B-GAIN
0 0 0
M-PED SHUTTER M-GAIN
0 100 0dB
<Screen 7-4>
Status with the
cursor at the
bottom level
on screen 7-3
Only the bottom is
changed using the
rotary encoder.
Only the bottom is
changed using the
rotary encoder.
Only the bottom is
changed using the
rotary encoder.