Panasonic AK-MSU935AP, Руководство по эксплуатации

Страница: 6 / 76

6
5. MODE ON/OFF switches [MODE]
These switches are for setting the camera operation
modes. The modes corresponding to the switches with
the lighted lamps are selected.
(Bear in mind that the functions of some of these
switches will be ON and the functions of others will be
OFF when their LEDs for the switches are lighted.)
A
5600K switch [5600K]
This is used to change the amplification rate of
the GBR signals by an electrical circuit to achieve
the white balance that corresponds to the color
temperature of 5600K.
When it is pressed, the B video signal is attenuated
by approximately −6 dB, the R video signal is boosted
by approximately 3 dB, and the G video signal is not
attenuated.
Select the setting as required when using the
unit under a 5600K light source or in an outdoor
environment.
Lighted:
5600K
Off: 3200K
B
Flare OFF switch [FLARE OFF] (P.8)
This is used to cancel the flare correction function
(which suppresses the rise of the pedestal in
proportion to the light quantity).
Lighted: Flare correction function is canceled.
(Flare correction OFF)
Off: Flare correction function is valid.
C
Black gamma ON switch [BLK GAMMA ON] (P.9)
This is used to enable the black gamma function
(which changes the video signal amplification rate in
parts where the light quantity is low).
Lighted: Black gamma function is valid.
(Black gamma ON)
Off: Black gamma function is canceled.
D
Gamma OFF switch [GAMMA OFF] (P.9)
This is used to cancel the gamma correction function
(which provides the signal level of the video signals
with the reverse characteristics matching the TV video
signal input and light-emitting level characteristics).
Lighted:
Gamma correction function is canceled.
(Gamma correction OFF)
Off:
Gamma correction function is valid.
E
Knee OFF switch [KNEE OFF] (P.11)
This is used to cancel the knee function that
attenuates those parts of the video signals where a
particular level (knee point) has been exceeded so that
they will not become saturated as easily.
Lighted: Knee function is canceled. (Knee OFF)
Off:
Knee function is valid.
F
White clip OFF switch [W.CLIP OFF] (P.11)
This is used to cancel the white clip function by which
the video signal output is clipped (saturated).
Lighted: White clip function is canceled.
(White clip OFF)
Off: White clip function is valid.
(White clip ON)
G
Matrix ON switch [MATRIX ON] (P.12)
This is used to enable the function for correcting the
saturation and color phase.
Lighted: Color correction function is valid.
(Matrix ON)
Off: Color correction function is canceled.
(Matrix OFF)
H
HDTV detail OFF switch [HD.DTL OFF] (P.13)
This is used to cancel the function (detail enhancer)
for enhancing the detail (hard/soft) of the HDTV image
output.
This also takes effect for SD signals.
Lighted: HDTV detail enhancing function is
canceled.
(Detail enhancer OFF)
Off:
HDTV detail enhancing function is valid.
(Detail enhancer ON)
I
SDTV detail OFF switch [SD.DTL OFF] (P.15)
This is used to cancel the function (detail enhancer)
for enhancing the detail (hard/soft) of the SDTV image
output.
Lighted: SDTV detail enhancing function is
canceled.
(Detail enhancer OFF)
Off:
SDTV detail enhancing function is valid.
(Detail enhancer ON)
J
HDTV skin tone detail ON switch [HD.SKIN ON] (P.14)
This is used to suppress the detail in the skin color
parts of the HDTV video output.
Lighted:
HDTV skin tone detail suppression
function on
Off:
HDTV skin tone detail suppression
function off
Parts and their functions