Panasonic AK-MSU935AP, Руководство по эксплуатации

Страница: 25 / 76

25
4. When data is stored in a reference file, the LOCAL
STORE switch goes off, and the SCENE FILE switch
that corresponds to the reference file concerned lights
for one second, after which it goes off.

Reference file all store switch [ALL STORE]
*1
This is used to store the contents of the current file of
the camera selected using one of the camera selector
switches in the reference files of all the cameras
connected to the MSU.
How to store data in all the reference files
1. Use one of the camera selector switches to select the
camera whose file is to be called.
2. When the ALL STORE switch is pressed, SCENE
FILE 1 to 3 flash. If the switch is now held down for
3 seconds, the selection is canceled.
3. When SCENE FILE 1, 2 or 3 is pressed, the contents
of the current scene file of the camera now selected by
one of the camera selector switches are stored in the
reference file of all cameras which is not selected by
any of the camera selector switches.
4. If the reference files are stored in all the camera
connected to the MSU without any problems, the lamp
of the ALL STORE switch goes off.
If a problem is encountered in any of the cameras, the
lamp of the ALL STORE switch flashes.
When the camera selector switch concerned is selected,
the lamp stops flashing and goes off.
*1
If cameras of different models exist, the operation will
be performed for only the cameras of the same model
as the selected camera.
17. Camera video output selector switch
[CLOSE/BAR/TEST MODE]
This is used to select the mode of the camera video
signals which are to be output from the CCU’s rear panel.
The switches are self-illuminating, and the lighting of
the lamp of a switch indicates that the switch has been
selected.
CLOSE switch lamp lighted:
Camera video output (when the lens is closed)
BAR switch lamp lighted:
Color bar signal output
TEST switch lamp lighted:
Test signal output
18. Automatic adjustment switch [AUTO]
This is used to automatically adjust the camera video
output.
A
Auto white balance switch [AUTO WHITE]
This is used to automatically adjust the white balance.
Lighted:
This indicates that the switch has been
pressed and that automatic white
balance start has been accepted.
Flashing: This indicates that the automatic white
balance adjustment has ended, but it
warns that the white balance was not
attained satisfactorily.
The original white balance is restored if
the white balance has not been attained
satisfactorily under high or low light
conditions. If the white balance cannot
be attained satisfactorily for some other
reason, the operation is terminated in
the final convergence status.
Off: If the lamp goes off after the automatic
white balance was completed, it
indicates that the white balance was
adjusted satisfactorily.
B
Auto black balance switch [AUTO BLACK]
This is used to automatically adjust the black balance.
Lighted: This indicates that the switch has
been pressed and that automatic black
balance start has been accepted.
Flashing: This indicates that the automatic black
balance adjustment has ended, but it
warns that the black balance was not
attained satisfactorily.
The status prior to the start of the
automatic black balance is restored.
Off: If the lamp goes off after the automatic
black balance was completed, it
indicates that the black balance was
adjusted satisfactorily.
Parts and their functions