Panasonic AK-MSU935AP, Руководство по эксплуатации

Страница: 17 / 76

17
SD skin tone detail

When the AK-HC3500A/AK-HC3500 camera is
used
This is used to apply coring to the detail
enhancement of the skin tone areas in the SDTV
video output signals to soften the skin tone detail
enhancement.
When the SDTV skin tone detail OFF switch is
lighted, the effects will be reflected in the images
and the numerical values can be changed.

When the AK-HC3800 camera is used
This does not operate and “- - -” is displayed
because the function is not available.
Example of screen display: SD DETAIL (2/2)
< SD DETAIL > ( 2 / 2 )
SKIN LEVEL
ZEBRA
PHASE WIDTH CRISP
SKIN LEVEL
MID
M-PED SHUTTER M-GAIN
0 100 0dB
SKIN LEVEL: Skin detail level

When the AK-HC3500A/AK-HC3500 camera
is used
This is used to set the chroma saturation of the
parts where the skin tone detail is applied.
Selection range: LOW, MID, HIGH

When the AK-HC3800 camera is used
This does not operate and “- - -” is displayed
because the function is not available.
ZEBRA: Skin tone area zebra

When the AK-HC3500A/AK-HC3500 camera
is used
This is used to set whether to apply the zebra
pattern to the areas where coring is applied as
the skin tones to the Y signals in the PM output.
Selection range: OFF, ON

When the AK-HC3800 camera is used
This does not operate and “- - -” is displayed
because the function is not available.
PHASE: Skin tone area phase

When the AK-HC3500A/AK-HC3500 camera
is used
This is used to move the areas to be recognized
as the skin tones in the range of 93 to 153 along
the Q axis on the color vector display.
Adjustment range: 93 to 153

When the AK-HC3800 camera is used
This does not operate and “- - -” is displayed
because the function is not available.
WIDTH: Skin tone area width

When the AK-HC3500A/AK-HC3500 camera
is used
This is used to widen the areas to be recognized
as the skin tones in the range of 1 to 20 along
the I axis on the color vector display.
Adjustment range: 1 to 20

When the AK-HC3800 camera is used
This does not operate and “- - -” is displayed
because the function is not available.
CRISP: Skin tone detail crisp

When the AK-HC3500A/AK-HC3500 camera
is used
This is used to remove the very faint noise
components from the detail components of the
skin tone areas.
Adjustment range: 0 to 7

When the AK-HC3800 camera is used
This does not operate and “- - -” is displayed
because the function is not available.
L
System switches [SYSTEM]
These switches are used for such purposes
as selecting the down-converter mode and the
up-converter mode and switching between HDTV
video output YP
B
P
R
and GBR and between SDTV
video output YP
B
P
R
and GBR.
Example of screen display: SYSTEM (1/3)
< SYSTEM > ( 1 / 3 )
CAM RCV CCU RCV
RET1 SEL RET2 SEL RET3 SEL RET4 SEL
RET.DELAY(HD)
D/C MODE
U/C MODE RATIO VFMD
HD BAR SD BAR PATHO SET UP
CAM RCV CCU RCV
5 5
M-PED SHUTTER M-GAIN
0 100 0dB
CAM RCV: Camera head optical reception
strength level displays
CCU RCV: CCU unit optical reception strength
level displays
These indicate the optical reception strength
margins of the camera head and CCU.
5
: –14.0 dB or more
4: –16.0 dB or more but less than –14.0 dB
3:
–17.0 dB or more but less than –16.0 dB
2: –18.0 dB or more but less than –17.0 dB
1
: Less than -18.0 dB
If the margin becomes step 3 or less, clean the
optical contact area.
Parts and their functions