45
Adjustments and Settings for Recording : Adjusting the White balance and Black Balance
A
d
ju
stm
ents and S
e
tti
ngs f
o
r
Rec
o
rdi
n
g
To record high-quality video with the unit, the black and white balances must be adjusted according to conditions.
For higher quality, it is recommended that the adjustments should be made in this order AWB (white balance adjustment)
>
ABB (black balance adjustment)
>
AWB (white balance adjustment).
Whenever light conditions change, the white balance must
be re-adjusted.
To adjust the white balance, follow the steps below.
1
Set the switches as illustrated below.
2
Adjust the CC/ND FILTER control according to the
light conditions.
Note
For examples of CC/ND FILTER adjustments, see
[Shooting and Recording/Playback Functions Section]
(page 17).
3
Place a white pattern at a point where the light
conditions match those for the light source of the
subject. Then zoom-in on the white pattern so that
white color appears in the screen. A white object
(cloth or wall) may be used instead of a white pattern.
The illustration below shows the required size for the
white space.
Notes
z
Do not include a high-intensity spot in the screen.
z
The white object must appear at the center of the
screen.
4
Adjust the lens iris.
5
Flip up the AUTO W/B BAL switch so that it is
positioned at [AWB], then release it.
The switch returns to the central position with the
white balance automatically adjusted.
Note
To cancel automatic white balance adjustment in
process (the viewfinder displays “AWB ACTIVE”), re-
position the AUTO W/B BAL switch at [AWB].
If automatic adjustment is cancelled, the value in
effect before automatic adjustment will be used.
6
During an adjustment, the viewfinder displays the
following message:
7
The adjustment will take effect in a few seconds, and
the following message will appear:
The adjusted value is automatically stored in the
memory specified in Step
1
([A] or [B]).
8
For the 3200K CC/ND filter, if the subject’s color
temperature is lower than 2300K or higher than
9900K the following message appears:
If the arrow points down (
;
) the actual color
temperature is lower than the temperature indicated.
If the arrow points up (
:
) the actual temperature is
higher than the temperature indicated.
Adjusting the White balance and Black Balance
Adjusting the White Balance
OUTPUT:
CAM
AUTO W/B BAL switch:
Used to perform
AWB.
GAIN:
Under normal conditions, set to 0 dB
If it is too dark, an appropriate gain
should be set.
WHITE BAL:
A or B
CC/ND FILTER control
1/4 or more of the screen in width
1/4 or more of the
screen in height
AWB ACTIVE
AWB A OK 3.2K
AWB A OK 2.3K
;
AJ-HPX2000P(VQT1D27-1)E.book 45 ページ ２００７年７月３０日 月曜日 午後１時３１分
