manualshive.com logo in svg

Panasonic AJ-HPX2000, Руководство по эксплуатации

Panasonic AJ-HPX2000 - профессиональная видеокамера высокого качества. Для ознакомления с ее функциями и настройками, загрузите бесплатное руководство по эксплуатации на manualshive.com. Научитесь использовать камеру эффективно, скачав Operating Instructions Manual прямо сейчас.

Поделиться
Скачать
background image

74

Adjustments and Settings for Recording : Viewfinder Screen Status Displays

Information Item

Indication

Status

13. System information 

and warnings

SYSTEM ERROR-

¢¢

TURN POWER OFF

CARD ERR 

¢

REC WARNING
BACKUP BATT EMPTY
FAN STOP
WIRELESS-RF
EOM
BOS
EOS
CANNOT REC

CANNOT PLAY

COMM ERROR

TEXT MEMO
TEXT MEMO INVALID
MARK ON/OFF

SHOT MARK INVALID
UPDATING
USB DEVICE

USB HOST

THUMBNAIL OPEN
1394 INITIAL ERROR

PROXY REC P2&SD

PROXY REC P2

NEAR END (SD)

EOM (SD)

PROXY CARD ERROR

SD CARD WRITE ERR

CANNOT DISP IN VF

TC REGEN

SLOT SEL

SLOT SEL INVALID

DIR NG CARD

SLOT1/2/3/4/5

RUN DOWN CARD

SLOT1/2/3/4/5

Something abnormal is happening to the internal computer communications 
or reference signal. No further recording or playback can be performed. 

¢¢ 

is replaced with an error code.For more information, see [Error Codes] 
(page 148).
P2 card has been removed while being accessed (recorded, played back, or 
formatted), and subsequent operation is disabled.
An error has occurred while recording data to or playing data from a P2 
card. In the actual indication the 

¢

 is replaced by the slot number of the P2 

card that triggered the error.
Something abnormal is happening to video and/or audio being recorded.
Backup battery needs replacing.
The fan is locked and halted.
RF signal from the wireless receiver is degraded.
P2 card has no free space. 
Playback position is at the start of all the clips.
Playback position is at the end of all the clips.
The P2 card is not recordable. Detailed information is provided on the 
FUNCTION screen of MODE CHECK. See the relevant section of the 
MODE CHECK indication area.
Clip cannot be played back perhaps because no P2 card is loaded, or the 
P2 card contains no clips.
Displayed when disconnection between microcomputers continues for a 
specified period or longer.
Text memo has been added.
Text memo has not been successfully added.
Shot mark been added or deleted. For information on shot marks, see [

Shot 

Mark Function

] (page 41).

This is displayed when shot marks cannot be added.

Clip information is being updated. Playback operation disabled.
AJ-HPX2000 is in USB DEVICE mode. When communication is disabled, 
the indication blinks.
Indicates that the camera-recorder is set to the USB HOST mode. When the 
external hard disk is not successfully recognized, then the indication blinks.
Thumbnail is being manipulated. 
Displayed when the connection of the DVCPRO/DV connector is abnormal 
(when AJ-YAD800G is attached).
Displayed when proxy recording on either the P2 card or the SD memory 
card starts (when AJ-YAX800G is attached, the PROXY REC item on the 
VF INDICATOR2 screen is turned on).
Displayed when proxy recording on the P2 card starts (when AJ-YAX800G is 
attached, the PROXY REC item on the VF INDICATOR2 screen is turned on).
When the remaining free space on the SD Memory card drops below one 
minute during proxy recording, the message is displayed (when AJ-
YAX800G is attached).
Displayed when full capacity is reached during proxy recording on the SD 
memory card (when AJ-YAX800G is attached).
Displayed when proxy recording stops because of failure on either the video 
encoder card or the stream.(when AJ-YAX800G is attached).
Displayed when a failure occurs on the SD memory card during proxy 
recording, and only recording on the SD memory card stops.(when AJ-
YAX800G is attached).
No return video, playback, or externally input video can be output to the 
viewfinder. 
The RET button was pressed to regenerate the time code as the time code 
for the last clip recorded on a P2 card.

This blinks while the recording slots of P2 cards are switched after pressing
the USER switch where the SLOT SEL function is assigned.
This is displayed if the recording slots of P2 cards cannot be switched when
the USER switch where the SLOT SEL function is assigned is pressed.
This is displayed when the recording starts or completes while a P2 card with
an irregular directory arrangement is inserted or data are recorded after
inserting an irregular P2 card.
This is displayed when the recording starts or completes with an expired P2
card or when data are recorded after inserting an expired P2 card.

14. Time code indication

TCG

12:59:59:20

TCR

12:59:59:20

(V)UBG

AB CD EF 00

(V)UBR

12 34 56 78

CTL

–1:59:59:20

TCG (time code generator value)
TCR (time code reader value)
UBG VUBG (User bits generator value)
UBR VUBR (User bits reader value)
Displays CTL count.

15. D.ZOOM

DZ

a

2/

a

3/

a

4

Magnification of the digital zoom when the unit is in digital zoom mode.

16. Extender

EX

Lens extender used.

AJ-HPX2000P(VQT1D27-1)E.book  74 ページ  ２００７年７月３０日　月曜日　午後１時３１分

Содержание AJ-HPX2000



































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AJ-HPX2000

Targus WEBCAM PLUS AVC042 User Manual preview
WEBCAM PLUS AVC042
Бренд: Targus Страницы: 8
JVC GR-AX96 Instructions Manual preview
GR-AX96
Бренд: JVC Страницы: 60
JVC GR-AX999UM Instructions Manual preview
GR-AX999UM
Бренд: JVC Страницы: 88
JVC GR-AXM100 Instructions Manual preview
GR-AXM100
Бренд: JVC Страницы: 56
JVC GR-AX920 Instructions Manual preview
GR-AX920
Бренд: JVC Страницы: 60
JVC GR-AXM270 Instructions Manual preview
GR-AXM270
Бренд: JVC Страницы: 60
JVC GR-AX930 Instructions Manual preview
GR-AX930
Бренд: JVC Страницы: 64
JVC GR-AX640 Instructions Manual preview
GR-AX640
Бренд: JVC Страницы: 56
JVC GR-AX911 Instructions Manual preview
GR-AX911
Бренд: JVC Страницы: 60
JVC GR-AX880US Service Manual preview
GR-AX880US
Бренд: JVC Страницы: 84
JVC GR-AX97 Instructions Manual preview
GR-AX97
Бренд: JVC Страницы: 64
JVC GR-AX940 Instructions Manual preview
GR-AX940
Бренд: JVC Страницы: 60
JVC GR-AXM10 Instructions Manual preview
GR-AXM10
Бренд: JVC Страницы: 60
JVC GR-AX640U Service Manual preview
GR-AX640U
Бренд: JVC Страницы: 32
JVC GR-AXM33EG Instructions Manual preview
GR-AXM33EG
Бренд: JVC Страницы: 176
JVC GR-AXM250 Instructions Manual preview
GR-AXM250
Бренд: JVC Страницы: 28
JVC GR-AX947UM Instructions Manual preview
GR-AX947UM
Бренд: JVC Страницы: 176
JVC GR-AXM368EG Instruction Manual preview
GR-AXM368EG
Бренд: JVC Страницы: 46

Бренды по названию

Популярные бренды

Загрузить еще бренды