manualshive.com logo in svg

Panasonic AJ-HPX2000, Руководство по эксплуатации

Panasonic AJ-HPX2000 - профессиональная видеокамера высокого качества. Для ознакомления с ее функциями и настройками, загрузите бесплатное руководство по эксплуатации на manualshive.com. Научитесь использовать камеру эффективно, скачав Operating Instructions Manual прямо сейчас.

Поделиться
Скачать
background image

2

 indicates safety information.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 

DO NOT REMOVE COVER (OR  BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (service) instructions in the
literature accompanying the appliance.

WARNING:

z

TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.

z

TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, KEEP THIS EQUIPMENT AWAY
FROM ALL LIQUIDS. USE AND STORE ONLY
IN LOCATIONS WHICH ARE NOT EXPOSED
TO THE RISK OF DRIPPING OR SPLASHING
LIQUIDS, AND DO NOT PLACE ANY LIQUID
CONTAINERS ON TOP OF THE EQUIPMENT.

CAUTION:

This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one of the following measures:

z

Reorient or relocate the receiving antenna.

z

Increase the separation between the equipment and
receiver.

z

Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

z

Consult the dealer or an experienced radio/TV technician for
help.

The user may find the booklet “Something About Interference”
available from FCC local regional offices helpful.

FCC Warning: 

To assure continued FCC emission limit

compliance, the user must use only shielded interface cables
when connecting to host computer or peripheral devices. Also,
any unauthorized changes or modifications to this equipment
could void the user’s authority to operate this device.

Declaration of Conformity

Model Number:

AJ-HPX2000P/AJ-HPX2100E

Trade Name:

PANASONIC

Responsible Party: Panasonic Corporation of North America

One Panasonic Way, Secaucus, NJ 07094

Support contact:

Panasonic Broadcast & Television Systems
Company 1-800-524-1448

This device complies with Part 15 of FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
To assure continued compliance, follow the attached
installation instructions and do not make any unauthorized
modifications.

CAUTIONS:

TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD AND ANNOYING INTERFERENCE,
USE THE RECOMMENDED ACCESSORIES
ONLY.

CAUTIONS:

TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, REFER MOUNTING OF OPTIONAL
INTERFACE BOARDS TO QUALIFIED SERVICE
PERSONNEL.

CAUTIONS:

In order to maintain adequate ventilation, do not
install or place this unit in a bookcase, built-in
cabinet or any other confined space. To prevent risk
of electric shock or fire hazard due to overheating,
ensure that curtains and any other materials do not
obstruct the ventilation.

A rechargeable battery that is recyclable powers the product you have purchased. 

<For USA-California Only>

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material — special handling may apply.
See www.dtsc.ca/gov/hazardouswaste.perchlorate.

Caution regarding laser beams

The CCD may be damaged if it is subjected to light from a laser beam.

When using the camera-recorder in locations where laser 

irradiation equipment is used, be careful not to allow

the laser beam to shine directly on the lens.

Read this first!

AJ-HPX2000P(VQT1D27-1)E.book  2 ページ  ２００７年７月３０日　月曜日　午後１時３１分

Содержание AJ-HPX2000



































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AJ-HPX2000

RCA Small Wonder EZ2120 series User Manual preview
Small Wonder EZ2120 series
Бренд: RCA Страницы: 34
RCA Small Wonder EZ2050 series User Manual preview
Small Wonder EZ2050 series
Бренд: RCA Страницы: 34
Sony HANDYCAM PMW-320L User Manual preview
HANDYCAM PMW-320L
Бренд: Sony Страницы: 10
Sony Handycam Vision CCD-TRV10E Operating Instructions Manual preview
Handycam Vision CCD-TRV10E
Бренд: Sony Страницы: 72
Sony Handycam Vision CCD-TRV62 Operating Instructions Manual preview
Handycam Vision CCD-TRV62
Бренд: Sony Страницы: 84
Sony Handycam Vision CCD-TRV16 Operating Instructions Manual preview
Handycam Vision CCD-TRV16
Бренд: Sony Страницы: 84
Sony Handycam NEX-VG900 Service Manual preview
Handycam NEX-VG900
Бренд: Sony Страницы: 76
Sony HANDYCAM VISION CCD-TRV64E Operating Instructions Manual preview
HANDYCAM VISION CCD-TRV64E
Бренд: Sony Страницы: 104
Sony HANDYCAM VISION CCD-TRV45E Operating Instructions Manual preview
HANDYCAM VISION CCD-TRV45E
Бренд: Sony Страницы: 112
Sony HANDYCAM VISION CCD-TRV94 Operating Instructions Manual preview
HANDYCAM VISION CCD-TRV94
Бренд: Sony Страницы: 128
Sony Handycam Vision CCD-TRV89E Operating Instructions Manual preview
Handycam Vision CCD-TRV89E
Бренд: Sony Страницы: 132
Sony Handycam Vision CCD-TRV37E Operating Instructions Manual preview
Handycam Vision CCD-TRV37E
Бренд: Sony Страницы: 124
Sony Handycam Vision CCD-TRV66E Operating Instructions Manual preview
Handycam Vision CCD-TRV66E
Бренд: Sony Страницы: 128
Sony Handycam Vision CCD-TRV54E Operating Instructions Manual preview
Handycam Vision CCD-TRV54E
Бренд: Sony Страницы: 128
Sony Handycam Vision CCD-TRV300E Operating Instructions Manual preview
Handycam Vision CCD-TRV300E
Бренд: Sony Страницы: 136
Sony Handycam Vision CCD-TRV107E Operating Instructions Manual preview
Handycam Vision CCD-TRV107E
Бренд: Sony Страницы: 132
Sony Handycam Vision CCD-TRV66E Service Manual preview
Handycam Vision CCD-TRV66E
Бренд: Sony Страницы: 166
Sony Handycam Vision CCD-TRV300E Service Manual preview
Handycam Vision CCD-TRV300E
Бренд: Sony Страницы: 167

Бренды по названию

Популярные бренды

Загрузить еще бренды