156
Menu : Menu Description Tables
The ____ in the Adjustable Range column indicates the
preset mode.
SYSTEM MODE
Items/
Data Saved
Adjustable
Range
Remarks
PC MODE
ON
OFF
Used to enable or disable the mode that
allows the camera-recorder to be
connected to a PC or an external hard
disk drive via USB 2.0.
ON:
Sets the camera-recorder to the
mode selected through the PC
MODE SELECT menu option.
OFF:
Disables the PC MODE for normal
operation.
Note
Once the power is turned off, the option
is always set to OFF when the power is
turned on next time.
– –
–
F –
OPTION MODE
Items/
Data Saved
Adjustable
Range
Remarks
REC TALLY
RED
GREEN
CHAR
Select the method for displaying the
recording status of camera-recorder
when controlling an external VTR by
setting 1394 CONTROL items to BOTH.
Select the 1394 CONTROL item on the
<1394 SETTING> screen in the SYSTEM
SETTING page.
RED:
The red tally lamp lights up.
GREEN:
The green tally lamp lights up.
CHAR:
The VF displays [REC] in
characters.
– C U F –
ACCESS LED OFF
SLOT SIDE
LCD SIDE
BOTH
Specify whether or not to enable the P2
card access LEDs.
OFF:
Disables both LEDs above the
slots and on the side panel.
SLOT SIDE:
Enables the LED above the slots
and disables the LED on the side
panel.
LCD SIDE:
Enables the LED on the side panel
and disables the LED above the
slots.
BOTH:
Enables both LEDs above the
slots and on the side panel.
– C U F –
P.OFF GPS
DATA
HOLD
CLEAR
Select whether or not to hold the UMID
GPS position information while the
power is turned off, thereby keeping this
information as status data holding the
previous value until the power is turned
on again, which enables a new
measurement to start.
HOLD:
Hold and save the data.
CLEAR
:
Clear the data when the power
is turned off, and save zero (No-
Info) from the next power-on
until a new measurement is
completed.
– C U F –
SDI
METADATA
ON
OFF
Used to specify whether or not to output
metadata (UMID) to SDI when the
VIDEO OUT menu option is set to HD
SDI or SD HDI.
– C U F –
SDI EDH
ON
OFF
Select whether or not to add an error
detection flag to the SD SDI output.
– C U F –
Items/
Data Saved
Adjustable
Range
Remarks
SAVE SW
(AUD OUT)
ON
OFF
Select whether or not to forcibly disable
the audio output when the SAVE ON/
OFF switch is set to [ON].
ON:
Disable audio output.
OFF:
Enable audio output.
– C U F –
SAVE SW
(LCD)
ON
OFF
Select whether or not to automatically
turn off the LCD monitor when the SAVE
ON/OFF switch is set to [ON].
ON:
Turn off LCD monitor.
OFF:
Do not turn off LCD monitor.
– C U F –
COMPRESSION
MODE
NORMAL
DARK
Select a compression mode for the
720P mode (
Only for recording DVCPRO
HD for 720-59.94P and 720-50P
).
NORMAL:
The normal shooting mode is
selected.
DARK:
Compressed video distortion that
occurs in dark areas is lowered, which
may increase distortion in other
areas.
– C U F –
AUTO REC
OFF
TYPE1
TYPE2
Select the method for detecting REC
START/STOP marks from the frame rate
information in the user bits added
through HD SD IN in HD mode in order
to automatically start or stop recording
(for the AJ-YA350AG, an SDI-IN option).
OFF:
No automatic recording is
performed.
TYPE1:
REC START/STOP marks are
detected from LTC input
through HD SDI for automatic
recording.
TYPE2:
REC START/STOP marks are
detected from VITC input
through HD SDI for automatic
recording.
Note
Set the menu option REC SIGNAL to
SDI to input HD SDI signals to the SDI
IN connector. For information about user
bits frame rate information, see [
The AUTO REC function does not
operate in INTERVAL REC and LOOP
REC modes.
– C U F –
AJ-HPX2000P(VQT1D27-1)E.book 156 ページ ２００７年７月３０日 月曜日 午後１時３１分
