39
Recording and Playback
：
Recording Review Function
R
e
c
o
rd
in
g a
n
d
P
la
y
ba
c
k
When recording is paused, pressing the RET button
automatically locates the last two seconds of video just
recorded, and the viewfinder provides video playback.
After playback, the camera-recorder is again ready to start
recording.
The picture location/playback duration can be increased to
up to 10 seconds by continuously pressing the RET button.
For short clips, however, when the start of a clip is located,
continuously pressing the RET button does not play back
any clips before that clip.
The function of the RET button may be assigned to a
desired user button by using one of the menu options
USER MAIN SW, USER1 SW or USER2 SW. These
options can be found in the <USER SW> screen on the
CAM OPERATION page.
When recording is paused, pressing the PLAY/PAUSE
button plays back the last recorded clip, from the
beginning. After completion of playback, the camera-
recorder enters the stopped state.
Notes
z
Set the menu option RET SW (found on the SW MODE
page for CAM OPERATION) to R. REVIEW.
z
When the OUTPUT SEL switch on the side panel is
positioned at [MEM], the video for REC REVIEW is
output from the video output connectors (VIDEO OUT
and MON OUT connectors), and also to the viewfinder.
Note that when a backup device is connected to back up
the video the pictures for REC REVIEW are backed up.
Recording Review Function
Recorded clip
2-10 Seconds
The PLAY button plays back
the clip from the beginning.
Recording starts
Recording pauses
The RET button
puts the camera-
recorder into REC
REVIEW mode.
AJ-HPX2000P(VQT1D27-1)E.book 39 ページ ２００７年７月３０日 月曜日 午後１時３１分
