88
Adjustments and Settings for Recording : Handling data
It is possible to transfer settings and other data to the user
area of the internal memory of the unit.
This data allows you to quickly reproduce an optimum
setup state.
To write data, go to the <INITIALIZE> screen from the FILE
page. To read the written user data, go to the <SCENE>
screen from the FILE page.
1
Navigate the menu to the <INITIALIZE> screen.
2
Turn the JOG dial button to move the cursor to the
option WRITE USER DATA.
3
Press the JOG dial button to display the following
message:
4
Turn the JOG dial button to move the cursor to YES.
Then, press the dial button.
This writes the settings data into the user area of the
internal memory of the unit.
5
To exit the menu, press the MENU button.
1
Navigate the menu to the <SCENE> screen.
2
Turn the JOG dial button to move the cursor to the
option READ USER DATA.
3
Press the JOG dial button to display the following
message:
4
Turn the JOG dial button to move the cursor to YES.
Then, press the dial button.
The data written in the user area of the internal
memory of the unit is read to complete the setting.
5
To exit the menu, press the MENU button.
The set user data may be also read without navigating the
menu.
1
Turn off the POWER switch.
2
Position the WHITE BAL switch at [PRST].
3
With the AUTO W/B BAL switch flipped up, turn on the
POWER switch.
This resets all settings for USER menu options to
their defaults.
How to Use the User Data
To write settings data in the user area
To read written user data
< INITIALIZE >
READ FACTORY DATA
#
WRITE USER DATA
WRITE?
YES
#
NO
< SCENE >
#
READ USER DATA
SCENE SEL :1
READ
WRITE
RESET
TITLE1 : ********
TITLE2 : ********
TITLE3 : ********
TITLE4 : ********
READ?
YES
#
NO
WHITE BAL
Switch
AJ-HPX2000P(VQT1D27-1)E.book 88 ページ ２００７年７月３０日 月曜日 午後１時３１分
