Panasonic AJ-CX4000G, Руководство по эксплуатации

Страница: 160 / 221

– 160 –
Chapter 5 Shooting — Handling setting data
1/4
2
4
A S D F G H J K L
A-a Z X C V B N M BS
Q
W
E R T Y U I O P
Enter
123
#+=
FILE NAME
1
SETUP004
SETUP003
SETUP002
SETUP001
3
08:11:06
08:10:00
08:08:11
08:05:10
MENU>OTHERS>FILE>SETUP FILE(SD CARD)>SAVE
DEC-01-2019
DEC-01-2019
DEC-01-2019
DEC-01-2019
MENU>OTHERS>FILE>SETUP FILE(SD CARD)>SAVE AS
Fig. 1 Fig. 2
Saving a setup file as a new file on a SD card
Current setting values of the camera is saved as a new file in a SD card by specifying the file name.
1
Select the [OTHERS] menu → [FILE] → [SETUP FILE(SD CARD)] → [SAVE AS].
The file name entry screen and the keyboard are displayed. (Fig. 1)
2
Enter the text to set with the keyboard.
3
Select [Enter].
A confirmation screen is displayed.
4
Select [SET].
The file is saved.
Overwriting a setup file on SD card
Overwrites the file selected in the list of the setup files saved on the SD card with the current setting values of the camera.
1
Select [OTHERS] menu → [FILE] → [SETUP FILE(SD CARD)] → [SAVE].
The list of setup files saved on the SD card is displayed. (Fig. 2)
2
Select the file to overwrite from the list of setup files.
The file name entry screen and the keyboard are displayed. Leave it as is when overwriting.
3
Select [Enter].
A confirmation screen is displayed.
4
Select [SET].
The file is saved.
Saving the setup file to the camera memory
Saves the current setting value of the camera into the camera memory.
1
Select [OTHERS] menu → [FILE] → [SETUP FILE(MEMORY)] → [SAVE].
Loading the setup file
Loads a setup file from the camera memory or the SD card.
Loading the setup file from the SD card
Loads a setup file saved in the SD card.
1
Select the [OTHERS] menu
→
[FILE]
→
[SETUP FILE(SD CARD)]
→
[LOAD].
A list of setup files stored in the specified folder in the SD card is displayed.
2
Select the name of the file to load.
3
Select [SET].
Loading of the file is started. The camera is restarted after loading.
f
An error message may be displayed. For error message, refer to “Warning system” (page 203).
f The file saved with different firmware version may not be able to load.
Loading setup files from the camera memory
Loads the setup file saved on the camera memory.
1
Select the [OTHERS] menu → [FILE] → [SETUP FILE(MEMORY)] → [LOAD].
Loading of the file is started. The camera is restarted after loading.