Panasonic AJ-CX4000G, Руководство по эксплуатации

Страница: 168 / 221

– 168 –
Chapter 6 Playback — Thumbnail operation
6 Displaying the connection status of the wired LAN/wireless LAN
Displays the connection status of the wired LAN and wireless LAN.
(No display):
It is not connected via wired LAN or wireless LAN. It is set to the [NETWORK] menu → [DEVICE SEL] → [OFF].
:
It is set to the wired LAN, and ROP is not connected.
:
It is set to the wired LAN, and ROP is connected.
:
It is set to the wireless LAN, and ROP is not connected.
:
It is set to the wireless LAN, and ROP is connected.
7 Battery status display
Displays the battery remaining capacity.
Display unit is “V” (voltage display) or “%” (percentage display).
8 Scroll bar
Indicates which part of the whole thumbnail is currently being viewed.
9 Clip that cannot be played back
Displays when the clip cannot be played back in the camera such as standard violation.
10 Cursor
11 Page switching button
Switches the page of the thumbnail screen.
[ ` ]: Moves to previous page
[ { ]: Moves to next page
@ @
NOTE
t When P2 is selected as the recording file format, a clip recorded over multiple memory cards is displayed as one clip.
t MOV clip and P2 clip cannot be displayed in the thumbnail screen simultaneously.
Display of the clips in the thumbnail screen
2
7
1
8
9
3
4
6
5
10
11
1 Thumbnail number
Displays the thumbnail number in [0001] to [9999].
Normally, the number assigned to the clip in the order of recording is displayed.
2 Resume play status
3 Number of recording pixels, system frequency
4 Recording file format, recording codec
5 Protection status of the clip
This is displayed when the clip is protected.
6 Standard time code/clip name
The first eight digits for the time code when starting shooting of a clip or the file name of the clip are displayed in alphanumeric.
The information to display is set in the [THUMBNAIL] menu
→ [DISPLAY] → [DATA].
7 Delete selection status
8 Clip that cannot be played back
This is displayed when the clip cannot be played back with the camera because the system frequency is different, etc.
9 Copy selection status
This is displayed when the clip is selected.
10 Incomplete clip
: This is displayed for a P2 clip when the clip is recorded over multiple memory cards, and any of those memory cards are not inserted.
11 Defective clip/unknown clip
: This is displayed for a defective P2 clip that may be repaired.
: This is displayed for a defective P2 clip that cannot be repaired.
: This is displayed for a P2 clip with a different format for P2 standard.