Panasonic AJ-CX4000G, Руководство по эксплуатации

Страница: 105 / 221

– 105 –
Chapter 4 Operation — Menu settings
The items that can be set are as follows.
f [ − 100]…[100]
(Factory setting: [0])
[H PHASE FINE]
Performs fine adjustment to match horizontal synchronization phase when building a system.
The items that can be set are as follows.
f [ − 100]…[100]
(Factory setting: [0])
[COLOR BARS]
[COLOR BARS TYPE]
Sets the color bar to be used.
[SMPTE] Uses the color bars in SMPTE standard.
[FULL] Uses the full color bars.
(Factory setting: [SMPTE])
@ @
NOTE
t A smear may occur depending on the output resolution.
[TEST TONE]
Sets whether the audio test signal (tone signal with specification level 1 kHz) is output when the video is switched to the color bar.
The standard level varies depending on the setting of the [AUDIO] menu
→ [REC CH SETTINGS] → [HEAD ROOM].
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[LED]
[REC TALLY]
Selects the method to display recording status at the camera.
[RED] The red tally lamp illuminates.
[GREEN] The green tally lamp illuminates. (Only in viewfinder)
[CHAR] REC is displayed in characters in the viewfinder and the LCD monitor.
(Factory setting: [RED])
@ @
NOTE
t If set to [GREEN] or [CHAR], the front tally lamp, back tally lamp and rear tally lamp of the viewfinder do not illuminate while this camera is recording.
[ACCESS LED]
Sets whether the card access lamp is to illuminate or not.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[LAN LED]
Sets whether to illuminate the LAN connector lamp.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[STREAMING LED]
Sets whether to illuminate the <STREAMING> lamp.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[CLOCK]
[CLOCK SETTING]
Sets the calendar (date of the internal clock) and time.
Year [2019]…[2037]
Month [JAN]…[DEC] ([1]…[12])
Day [1]…[31] ([28], [29], [30])
Hour [0]…[23]