Panasonic AJ-CX4000G, Руководство по эксплуатации

Страница: 207 / 221

– 207 –
Chapter 10 Maintenance — Warning system
Screen display
Description Behavior and cause
Camera image screen
[INVALID] Operation is disabled. A message is displayed.
f Operate after the the operation becomes enabled.
[Cannot record - Playlist capacity is
full.]
The camera tried to record on a memory card where
the number of playlists for recording has reached the
maximum.
A message is displayed.
f Replace the memory card or delete unnecessary clips.
[Cannot copy - Playlist capacity is full.] The camera tried to copy to a memory card where
the number of playlists for recording has reached the
maximum.
A message is displayed.
f Replace the memory card or delete unnecessary clips.
[Exceeds capacity. Please reselect.] The remaining recording capacity of the memory card for
the copy destination is insufficient.
A message is displayed.
f Select the clip to copy again, or secure enough space in
the remaining recording capacity on the memory card for
the copy destination.
[Check the destination media.] An error has occurred on the memory card for the copy
destination while copying.
A message is displayed.
f Confirm the memory card for the copy destination.
[LOAD NG] Loading of the scene file has failed. A message is displayed.
f Check the memory card.
[SAVE NG] Writing of the scene file has failed. A message is displayed.
f Check the memory card.
[DISCONNECT USB CABLE.] Due to an OS non-compatible error, five minutes has
elapsed until the service mode connection is established.
A message is displayed.
f Confirm if the OS in use is supported by the camera.
[CARD LOCKED.] The camera tried to protect or delete a clip on a memory
card that has been locked.
The camera tried to copy a clip to the memory card that
has been locked.
A message is displayed.
f Unlock the memory card.
[CANNOT SELECT MORE CLIPS.] It has tried to select more than 99 clips. A message is displayed.
f Execute the process such as copying by every 99 clips.
[SELECT THE CLIP TO BE
DELETED.]
It has tried to delete a clip without choosing any. A message is displayed.
f Select a clip to be deleted.
[SELECT THE CLIPS TO COPY.] It has tried to copy a clip without choosing any. A message is displayed.
f Select a clip to be copied.
[NO CARD.] Copying was tried to be executed without inserting a
memory card into card slot.
A message is displayed.
f Insert a memory card into the card slot.
[REINSERT OR CHECK CARD
<SLOT 1>]/[REINSERT OR CHECK
CARD <SLOT 2>]/[REINSERT OR
CHECK CARD <SLOT 3>]
It has tried to copy to an error card. A message is displayed.
f Check the memory card.
[CANNOT RECORD.] Cannot be recorded. A message is displayed.
f Perform recording after making it possible.
[REC PAUSE INVALID] The camera tried to stop the next recording before the
previous recording finished writing to the memory card.
A message is displayed.
f Stop recording after writing to the memory card is
complete. Recording can be stopped after the message
that is displayed disappears.
[WRITE PROTECTED] The write-protected switch on the memory card is set to
the Protect side or the LOCK side.
A message is displayed.
f Insert a memory card with write access.
[ATW MODE] The camera tried to execute auto white balance while auto
tracking white balance function operated.
A message is displayed.
f Cancel the auto tracking white balance function and
execute auto white balance.
[AWB PRESET **** K]
The camera tried to execute auto white balance when the
<WHITE BAL> switch is set to <PRST>.
A message is displayed.
f Set the <WHITE BAL> switch to <A> or <B> and execute
auto white balance.
[AWB UNABLE]
[S.GAIN MODE]
The camera tried to execute auto white balance while
super gain function operated.
A message is displayed.
f Cancel the super gain function and execute auto white
balance.
[CHECK FILTER] The <ND FILTER>/<CC FILTER> dial is not set correctly
at power on.
The camera tried to execute auto white balance when the
<CC FILTER> dial was not set correctly.
A message is displayed.
f Correctly set the <ND FILTER>/<CC FILTER> dial.
f Correctly set the <CC FILTER> dial and execute auto
white balance.
[LOW LIGHT] Brightness has dropped. A message is displayed.
f Adjust the brightness.