Panametrics HydroProII, Руководство пользователя

Страница: 35 / 104

HygroPro
II
User's Manual 23
Chapter 2. Operation
2.2.4 Setting up the Analog Output
To set up the analog output, complete the following steps (no Passcode required):
Use the arrow keys to change the Contrast value and press Enter. The
default value is set to 10. Then press Enter to return to the main menu.
To lock the display press Lock. The display then shows up with lock
sign in the top right corner as shown. Please note the default mode for
the display is unlocked.
To unlock the display press Enter

Escape

, Enter

in that
sequence. The Lock sign will disappear from the display.
After pressing Escape to access the Main Menu, use
the right arrow key to scroll to Output and press
Enter.
Select the Measurement option and press Enter. Use
the arrow keys to scroll to the desired output
parameter and press Enter.
In this example, the Pressure measurement is
selected. Press Enter to see choice of units available.
Press Enter and the display goes back to the
previous screen after briefly showing “Saved to
Memory” if any setting is changed.
In the Output menu, select Type and press Enter. The
screen on the left appears (with 4–20 mA as the
default choice):
Select the desired output Type and press Enter. If
NAMUR is selected instead, the display goes back to
the previous screen on pressing Enter.