Panametrics Aurora H2O, Руководство пользователя

Страница: 22 / 170

Chapter 1. Features and Capabilities
10 Aurora H2O User’s Manual
1.4.3 Response Time
Response Time:
Optical system <2 seconds
System Response:
The system response is dependent on the length of sample tubing, sample system components, flow rate and
pressure, as well as the change in moisture concentration.
1.4.4 Pressure
Operating Sample Cell Pressure:
10 to 25 psia (69 to 172 kPa)
Maximum Pressure:
200 psi (1380 kPa)
Process Pressure:
400 psig (2.76 MPa) [2500 psig (17.23 MPa) with heated pressure regulator option]
Note: Higher pressure available with the application of additional sampling system components.
1.4.5 Flow Rate
Sample Cell Flow Rate:
10 to 60 SLH (0.4 to 2 SCFH); 30 SLH (1 SCFH) nominal
By-Pass Fast Loop:
5 to 10X of flow rate through sample cell
1.4.6 Inputs/Outputs
Display:
Backlit LCD; three programmable simultaneous parameters; alphanumeric status and diagnostic display;
LEDs for power, laser temperature stability and keypad lockout
Power:
Analyzer: 100-240 VAC, 50-60 Hz, 24VDC
Analog Outputs:
Three 0/4-20 mA DC (source) with 500 ohm load; user programmable for any parameter and scalable;
complies with NAMUR protocol for analog signals
Analog Input:
Loop powered 4-20 mA input for remote pressure transmitter; Aurora supplies 24 VDC