Panametrics Aurora H2O, Руководство пользователя

Страница: 56 / 170

Aurora H2O User’s Manual 9
Chapter 3. Operation and General Programming
3.4.2 Selecting Alt 1 and Alt 2 Units
To set the units for Alt 1 and/or Alt 2 , use the arrow keys to highlight the one to be set,
and press Enter . The following screen appears:
Use the arrow keys to highlight the desired unit type ( Hygro , Temperature or Pressure ) and
press Enter . If
Temp
is selected, the following screen appears.
Use the arrow keys to highlight the desired unit and press Enter . The screen returns to
the Display Menu . Use the same procedure to change other units.
3.4.3Setting Decimal Places
To set the decimal places for unit values, from the Display Menu use the arrow keys to
highlight Decimal and press Enter . Then select the type of display and press Enter .
The decimal places setting determines the number of digits displayed for the value to
the right of the decimal symbol (“ . ”), if possible.
Use the arrow keys to change the number of decimal places and press Enter , or press
Cancel if no changes are necessary. The screen returns to the Display Menu .
3.4.4Data/Scan
To toggle the display between showing the numeric values (data), and a graphic plot
of the 2f waveform (scan), from the Display Menu use the arrow keys to highlight
Data/Scan and press Enter . A screen similar to the following appears.
Note:
The scan can be used for diagnostic purposes when a PC with AuroraView is
not readily available.