13
ENGLISH
Autodos M
MA60-10E
ENGLISH
Autodos M
MA60-10E
9. Operation
Displays, buttons and LEDS – general
The panel is divided into 4 groups. Group 1 (on the left) handles all activities and the others show values and handle limit and
value settings.
Button
no..
Function
Group
0
Calibration
1
1
Function selection
2
2
Level –
2
3
Level +
2
4
Function selection
3
5
Level –
3
6
Level +
3
7
Function selection
4
8
Level + / Temp
4
9
Level – / Flow
4
10
Authorization
1
11–14
Activity
1
15
Reset
1
The picture shows one example of all Autodos variants.
Group 1
Group 2
Group 3
Group 4
Displays
Depending on the Autodos M model variant, the values of free chlorine, combined chlorine and/or redox and pH are indecated in
one, two or three separate displays (each with three digits).
The displays can also show simple text messages; see the chapter Text display on page 16.
In some displays different values can be shown in the same field but then requires certain keystrokes, see page 14.
Under he actual display arrows and explanatory text are found. The position of the decimal point in the display confirms which
type of value is indicated.
The display to the far right can also be used to show flow and temperature.
The displays displays parameters within the following limits:
Free chlorine:
–.99–9.99 mg/l (ppm)
Combined chlorine: –.99–9.99 mg/l (ppm)
pH:
4.00–11.0
Redox
–99.–999. mV
Temperature:
10 – 40°C
Buttons
Each button has a unique number in the top right-hand corner. In this manual, reference is made to this number with [ ] and the
buttons text reference with bold style e.g.
Reset
[15].
Further on in this chapter we describe how and what buttons to press in which modes.
LEDs
Function activation is indicated with a green LED and all types of alarms are indicated with a red LED.
Read more about each LED indication on page 15.
