Orientalmotor aSTEP AZ Series, Руководство пользователя, Страница: 139 / 180

Parameter R/W commands
139
5 P
ar
amet
er ID lists
Parameter ID
Name Setting range Initial value Update
Dec Hex
361 0169h
(HOME) Backward steps in 2 sensor
home-seeking
0 to 8,388,607 steps 500
B
362 016Ah
(HOME) Operating amount in
uni-directional home-seeking
0 to 8,388,607 steps 500
363 016Bh
(HOME) Operating current for push-
home-seeking
0 to 1,000 (1=0.1 %) 1,000
364 016Ch
(HOME) Backward steps after first entry
in push-home-seeking
0 to 8,388,607 steps 0
365 016Dh
(HOME) Pushing time in push-home-
seeking
1 to 65,535 ms 200
366 016Eh
(HOME) Backward steps in push-home-
seeking
0 to 8,388,607 steps 500
8-10 Power removal function setting parameters
Parameter ID
Name Setting range Initial value Update
Dec Hex
400 0190h HWTO mode selection
0: Alarm is not present
1: Alarm is present
0
A
401 0191h HWTO delay time of checking dual system 0 to 10 (disable), 11 to 100 ms 0
408 0198h ETO reset ineffective period 0 to 100 ms 0
409 0199h ETO reset action (ETO-CLR)
1: ON-Edge
2: ON-Level
1
410 019Ah ETO reset action (ALM-RST)
0: Disable
1: Excitation at ON edge
0
411 019Bh ETO reset action (C-ON)
0: Disable
1: Excitation at ON edge
0
412 019Ch ETO reset action (STOP)
0: Disable
1: Excitation at ON edge
1
8-11 Alarm setting parameters
Parameter ID
Name Setting range Initial value Update
Dec Hex
384 0180h Overload alarm 1 to 300 (1=0.1 s) 50
A
385 0181h Excessive position deviation alarm 1 to 30,000 (1=0.01 rev) 300
24968 6188h Network bus error alarm
0: Disable
1: Enable
1