Guidelines
Please read and follow these guidelines prior to installing or removing the transcoder
DSP module:
•
The transcoder DSP module can be installed only in the designated location.
•
Ground yourself and follow proper ESD grounding procedures.
•
Remove the transcoder DSP module from the shipped packaging.
•
The installation of these modules should be performed during low-traffic periods or
during times of scheduled maintenance.
•
Follow industry-standard procedures to ensure ESD protection.
•
When installing or removing a DSP module, move the card to an ESD-safe
location.
Note:
Before handling any components, follow the proper ESD grounding
procedures. Failure to do so could damage the card and its components.
Chapter 5
Maintenance Without Power
5-14