OPTIMUM Maschinen OPTIturn 3432420, Руководство по эксплуатации

Страница: 26 / 138

Version 1.0.5 - 2020-12-09 26 Translation of original instructions
TX4414 GB
T
X
4414
_GB
_3.
fm
3.5 Installation conditions
In order to achieve sufficient safety against falls by slipping, the accessible area in the mechani-
cal machining zone of the machine must be equipped with a slip resistance. The slip-resistant
mat and/or slip-resistant flooring must be at least R11 in accordance with BGR 181.
The used shoes must be suitable for being used in those machining areas. The accessible sur-
faces must be cleaned.
Organize the working area around the machine according to the local safety regulations. The
work area for operation, maintenance and repair must not be restricted.

Follow the prescribed safety areas and escape routes according to VDE 0100 part 729 as
well as the environmental conditions for the operation of the machine.

The main switch of the machine must be freely accessible.

The machine must only be installed and operated in a dry and well-ventilated place.

Avoid places near machines generating chips or dust.

The installation site must be free from vibrations also at a distance of presses, planing
machines, etc.

Provide sufficient space for the personnel preparing and operating the machine and trans-
porting the material.

Also make sure the machine is accessible for setting and maintenance works.
3.5.1 Foundation and floor

Check the ground. The ground must bear the load of 1630 kg.

The ground must be prepared in a way that potential coolants cannot penetrate the floor.
3.5.2 Local requirements for delivery

minimum 2.5 tonne forklift.

Gates and doors with a minimum width of 1300mm and a minimum height of 2000mm.