OPTIMUM Maschinen OPTIturn 3432420, Руководство по эксплуатации

Страница: 13 / 138

Safety
Version 1.0.5 - 2020-12-09 13 Translation of original instruction
TX4414 EN
T
X
4414
_GB
_1.
fm
1.7 Operator positions
The operator position is in front of the lathe.
1.8 Safety measures during operation
CAUTION!
Danger due to inhaling dust and mist that are hazardous to health.
Dependent on the material which need to be processed and the used auxiliaries dusts
and mist may be caused which might impair you health.
Make sure that the generated health hazardous dusts and mist are safely sucked off at
the point of origin and is dissipated or filtered from the working area. To do so, use a
suitable extraction unit.
CAUTION!
Risk of fire and explosion by using flammable materials or cooling lubricants.
Extra precautionary measures must be taken before machining flammable materials (e.g.
aluminium, magnesium) or using combustible agents (e.g. spirit) to avert a health
hazard.
CAUTION!
Risk of becoming entangled or lacerations when using hand tools.
The machine is not designed for the use of hand tools (e.g. emery cloth or files). It is
forbidden to use any hand tools on this machine.
1.9 Safety devices
Use the lathe only with properly functioning safety devices.
Stop the lathe immediately if there is a failure on the safety device or if it is not functioning for
any reason.
It is your responsibility!
If a safety device has been deactivated or is defective, the lathe can only be used again if you

the cause of the fault has been eliminated,

you have verified that there is no danger to personnel or objects.
WARNING!
If you bypass, remove or override a safety device in any other way, you are endangering
yourself and other persons working on the lathe. The possible consequences are:

injuries due to components or workpieces flying off at high speed,

contact with rotating parts and

fatal electrocution,

pulling-in of clothes.
The lathe includes the following safety devices:

a lockable main switch,

an emergency-stop switch,

a lathe chuck protection with position switch,

a screwed protective cover on the headstock,

a DC brake of the spindle drive,

protective covers on the machine bed,

a safety screw at the tailstock,

a protective cover on the lead screw an feed rod,

safety screws for the Camlock bolts on the workpiece holder,

a chips shield.