OPTIMUM
M A S C H I N E N - G E R M A N Y
808D
Page 324
Operating and Programming — Milling
Create Part Program Part 1
Brief instruction 808D Milling
SEQUENCE
The following sequence should be followed to create a part
program:
Programs can be created
with the “program
manager”.
You can select the
“program manager” using
the key located on the
PPU.
Select NC as the storage location for the
program. Programs can only be created in
the NC.
Create a new program with the “New” SK on the right of the PPU.
Step 1
Step 2
Step 3
Create
program
Name
Type
Length
Date
Time
Execute
New
You can choose
“New” or “New
directory”.
Choose “New” to
create a program.
Choose “New
directory” to create
a file.
Now the program
is opened and can
be edited.
The system will save it automatically after editing.
1
2
Step 4
Step 5
End
Name
Type
Lenght
Date
Time
New G code program
Type:
Name:
Cancel
OK
New
directory
New
file
key to open file, [DEL]
key to delete file
