x
Preface
FiberPoint Structured Wiring Enclosure Installation Guide
Form 361015-0001A
Following is an example of an important message:
1118
IMPORTANT
IMPORTANT: Improper handling of electronic
components can result in an
electrostatic discharge that can cause
component failure.
Follow these rules to avoid damage:
Before handling electronic modules,
wear an anti-static discharge wrist strap
that is grounded to prevent damage.
Transport all static-sensitive compo-
nents in static-shielded containers or
packages.
When working on electronic modules,
always place them on an approved anti-
static mat that is electrically grounded.
Note Message
A note message is used to provide explanation, tips,
shortcuts or other significant information. Following is an
example of a note message:
NOTE: Store buffer tubes in the enclosure.
E
QUIPMENT
L
ABELS
There are several labels on Optical Solutions’ equipment
used to indicate dangers and hazards.
Warning Label
Various pieces of equipment may have warning labels
attached in order to alert people to possible electric shock.
Following is an example of a Warning Label:
ESD Label
The following label tells service personnel to wear the
wrist-grounding device when handling the printed circuit
assemblies. Be sure to attach the ground wire to any
available known good ground source.
Notice Label
A sign or label may be posted at or near any area that
contains laser equipment. This sign most often is posted
during periods of maintenance. The Class 1 laser used in
the GPON card and FiberPoint unit are the least invasive,
as compared to higher powered optical laser transmitters.
The Notice label will look similar to this:
A
GENCY
L
ISTINGS
FCC WARNING
This device complies with Part 15 of the FCC
Rules and Regulations. Operation is subject to
the following two conditions:
This device may not cause harmful interference,
and
This device must withstand any interference
received, including interference that may cause
undesired operation.
The FiberDrive has been tested and found to
comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules and Regula-
tions. These limits are designed to provide rea-
sonable protection against harmful interference
when this equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio-frequency energy and, if not
installed and used in accordance with the instruc-
tions in this guide, may cause harmful interfer-
ence to radio and television communications.
Operation of this HeadEnd equipment in a resi-
dential area is likely to cause interference, in
which case the user will be required to correct the
interference at his or her own expense.
Shielded cables must be used with this unit to
ensure compliance with the FCC Class A limits.
Do not attempt to repair or modify this equipment.
Any repairs must be performed by Optical Solu-
tions or an Optical Solutions authorized represen-
tative.
The FiberDrive is suitable for connection to intra-
building or non exposed wiring or cabling only.
Laser Transmitter
FDA Laser Class
Pursuant to the pertinent sections of Title 21, Code of
1141
2032
